lkml.org 
[lkml]   [2018]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[tip:x86/apic] x86/apic: Move pending interrupt check code into it's own function
Commit-ID:  9b217f33017715903d0956dfc58f82d2a2d00e63
Gitweb: https://git.kernel.org/tip/9b217f33017715903d0956dfc58f82d2a2d00e63
Author: Dou Liyang <douly.fnst@cn.fujitsu.com>
AuthorDate: Thu, 1 Mar 2018 13:59:28 +0800
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitDate: Thu, 1 Mar 2018 10:12:20 +0100

x86/apic: Move pending interrupt check code into it's own function

The pending interrupt check code is mixed with the local APIC setup code,
that looks messy.

Extract the related code, move it into a new function named
apic_pending_intr_clear().

Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: bhe@redhat.com
Cc: ebiederm@xmission.com
Link: https://lkml.kernel.org/r/20180301055930.2396-2-douly.fnst@cn.fujitsu.com

---
arch/x86/kernel/apic/apic.c | 100 ++++++++++++++++++++++++--------------------
1 file changed, 55 insertions(+), 45 deletions(-)

diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 2ceac9f6c5d7..69d2936e3154 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1408,6 +1408,56 @@ static void lapic_setup_esr(void)
oldvalue, value);
}

+static void apic_pending_intr_clear(void)
+{
+ long long max_loops = cpu_khz ? cpu_khz : 1000000;
+ unsigned long long tsc = 0, ntsc;
+ unsigned int value, queued;
+ int i, j, acked = 0;
+
+ if (boot_cpu_has(X86_FEATURE_TSC))
+ tsc = rdtsc();
+ /*
+ * After a crash, we no longer service the interrupts and a pending
+ * interrupt from previous kernel might still have ISR bit set.
+ *
+ * Most probably by now CPU has serviced that pending interrupt and
+ * it might not have done the ack_APIC_irq() because it thought,
+ * interrupt came from i8259 as ExtInt. LAPIC did not get EOI so it
+ * does not clear the ISR bit and cpu thinks it has already serivced
+ * the interrupt. Hence a vector might get locked. It was noticed
+ * for timer irq (vector 0x31). Issue an extra EOI to clear ISR.
+ */
+ do {
+ queued = 0;
+ for (i = APIC_ISR_NR - 1; i >= 0; i--)
+ queued |= apic_read(APIC_IRR + i*0x10);
+
+ for (i = APIC_ISR_NR - 1; i >= 0; i--) {
+ value = apic_read(APIC_ISR + i*0x10);
+ for (j = 31; j >= 0; j--) {
+ if (value & (1<<j)) {
+ ack_APIC_irq();
+ acked++;
+ }
+ }
+ }
+ if (acked > 256) {
+ printk(KERN_ERR "LAPIC pending interrupts after %d EOI\n",
+ acked);
+ break;
+ }
+ if (queued) {
+ if (boot_cpu_has(X86_FEATURE_TSC) && cpu_khz) {
+ ntsc = rdtsc();
+ max_loops = (cpu_khz << 10) - (ntsc - tsc);
+ } else
+ max_loops--;
+ }
+ } while (queued && max_loops > 0);
+ WARN_ON(max_loops <= 0);
+}
+
/**
* setup_local_APIC - setup the local APIC
*
@@ -1417,13 +1467,11 @@ static void lapic_setup_esr(void)
static void setup_local_APIC(void)
{
int cpu = smp_processor_id();
- unsigned int value, queued;
- int i, j, acked = 0;
- unsigned long long tsc = 0, ntsc;
- long long max_loops = cpu_khz ? cpu_khz : 1000000;
+ unsigned int value;
+#ifdef CONFIG_X86_32
+ int i;
+#endif

- if (boot_cpu_has(X86_FEATURE_TSC))
- tsc = rdtsc();

if (disable_apic) {
disable_ioapic_support();
@@ -1475,45 +1523,7 @@ static void setup_local_APIC(void)
value &= ~APIC_TPRI_MASK;
apic_write(APIC_TASKPRI, value);

- /*
- * After a crash, we no longer service the interrupts and a pending
- * interrupt from previous kernel might still have ISR bit set.
- *
- * Most probably by now CPU has serviced that pending interrupt and
- * it might not have done the ack_APIC_irq() because it thought,
- * interrupt came from i8259 as ExtInt. LAPIC did not get EOI so it
- * does not clear the ISR bit and cpu thinks it has already serivced
- * the interrupt. Hence a vector might get locked. It was noticed
- * for timer irq (vector 0x31). Issue an extra EOI to clear ISR.
- */
- do {
- queued = 0;
- for (i = APIC_ISR_NR - 1; i >= 0; i--)
- queued |= apic_read(APIC_IRR + i*0x10);
-
- for (i = APIC_ISR_NR - 1; i >= 0; i--) {
- value = apic_read(APIC_ISR + i*0x10);
- for (j = 31; j >= 0; j--) {
- if (value & (1<<j)) {
- ack_APIC_irq();
- acked++;
- }
- }
- }
- if (acked > 256) {
- printk(KERN_ERR "LAPIC pending interrupts after %d EOI\n",
- acked);
- break;
- }
- if (queued) {
- if (boot_cpu_has(X86_FEATURE_TSC) && cpu_khz) {
- ntsc = rdtsc();
- max_loops = (cpu_khz << 10) - (ntsc - tsc);
- } else
- max_loops--;
- }
- } while (queued && max_loops > 0);
- WARN_ON(max_loops <= 0);
+ apic_pending_intr_clear();

/*
* Now that we are all set up, enable the APIC
\
 
 \ /
  Last update: 2018-03-01 10:17    [W:0.083 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site