lkml.org 
[lkml]   [2018]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3] usb: host: ehci-platform: add support for optional external vbus supply
Date
Hi Roger,

On 02/28/2018 12:01 PM, Roger Quadros wrote:
> Hi Amelie,
>
> On 23/02/18 15:46, Amelie Delaunay wrote:
>> On some boards, especially when vbus supply requires large current,
>> and the charge pump on the PHY isn't enough, an external vbus power switch
>> may be used.
>> Add support for optional external vbus supply per port in ehci-platform.
>>
>> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
>>
>> ---
>> Changes in v3:
>> * Address Felipe Balbi comments: reduce indentation in
>> ehci_platform_port_power.
>> * Address Roger Quadros and Alan Stern comments: platforms can have one
>> external vbus supply per port, so add support to get as many optional
>> regulator as implemented ports on the host controller.
>>
>> Changes in v2:
>> * Address Roger Quadros comments: move regulator_enable/disable from
>> ehci_platform_power_on/off to ehci_platform_port_power.
>> ---
>> Documentation/devicetree/bindings/usb/usb-ehci.txt | 1 +
>> drivers/usb/host/ehci-platform.c | 52 +++++++++++++++++++++-
>> 2 files changed, 52 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt
>> index 3efde12..cd576db 100644
>> --- a/Documentation/devicetree/bindings/usb/usb-ehci.txt
>> +++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt
>> @@ -19,6 +19,7 @@ Optional properties:
>> - phys : phandle + phy specifier pair
>> - phy-names : "usb"
>> - resets : phandle + reset specifier pair
>> + - portN_vbus-supply : phandle of regulator supplying vbus for port N
>>
>> Example (Sequoia 440EPx):
>> ehci@e0000300 {
>
> Sorry for not pointing this out earlier but I think patch to DT bindings
> should come separately (before the driver changes) with the following subject.
>
> "dt-bindings: usb: ehci: <subject>"
>
>

Ok, I prepare a v4 with this split. Thanks!

>> diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
>> index b065a96..8e9f201 100644
>> --- a/drivers/usb/host/ehci-platform.c
>> +++ b/drivers/usb/host/ehci-platform.c
>> @@ -29,6 +29,7 @@
>> #include <linux/of.h>
>> #include <linux/phy/phy.h>
>> #include <linux/platform_device.h>
>> +#include <linux/regulator/consumer.h>
>> #include <linux/reset.h>
>> #include <linux/usb.h>
>> #include <linux/usb/hcd.h>
>> @@ -46,6 +47,7 @@ struct ehci_platform_priv {
>> struct reset_control *rsts;
>> struct phy **phys;
>> int num_phys;
>> + struct regulator **vbus_supplies;
>> bool reset_on_resume;
>> };
>>
>> @@ -56,7 +58,8 @@ static int ehci_platform_reset(struct usb_hcd *hcd)
>> struct platform_device *pdev = to_platform_device(hcd->self.controller);
>> struct usb_ehci_pdata *pdata = dev_get_platdata(&pdev->dev);
>> struct ehci_hcd *ehci = hcd_to_ehci(hcd);
>> - int retval;
>> + struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
>> + int portnum, n_ports, retval;
>>
>> ehci->has_synopsys_hc_bug = pdata->has_synopsys_hc_bug;
>>
>> @@ -71,11 +74,57 @@ static int ehci_platform_reset(struct usb_hcd *hcd)
>> if (retval)
>> return retval;
>>
>> + n_ports = HCS_N_PORTS(ehci->hcs_params);
>> + priv->vbus_supplies = devm_kcalloc(&pdev->dev, n_ports,
>> + sizeof(struct regulator *),
>> + GFP_KERNEL);
>> + if (!priv->vbus_supplies)
>> + return -ENOMEM;
>> +
>> + for (portnum = 0; portnum < n_ports; portnum++) {
>> + struct regulator *vbus_supply;
>> + char id[20];
>> +
>> + sprintf(id, "port%d_vbus", portnum);
>> +
>> + vbus_supply = devm_regulator_get_optional(&pdev->dev, id);
>> + if (IS_ERR(vbus_supply)) {
>> + retval = PTR_ERR(vbus_supply);
>> + if (retval == -ENODEV)
>> + priv->vbus_supplies[portnum] = NULL;
>> + else
>> + return retval;
>> + } else {
>> + priv->vbus_supplies[portnum] = vbus_supply;
>> + }
>> + }
>> +
>> if (pdata->no_io_watchdog)
>> ehci->need_io_watchdog = 0;
>> return 0;
>> }
>>
>> +static int ehci_platform_port_power(struct usb_hcd *hcd, int portnum,
>> + bool enable)
>> +{
>> + struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
>> + int ret;
>> +
>> + if (!priv->vbus_supplies[portnum])
>> + return 0;
>> +
>> + if (enable)
>> + ret = regulator_enable(priv->vbus_supplies[portnum]);
>> + else
>> + ret = regulator_disable(priv->vbus_supplies[portnum]);
>
> A newline could be used here.
>

Ok.

>> + if (ret)
>> + dev_err(hcd->self.controller,
>> + "failed to %s vbus supply for port %d: %d\n",
>> + enable ? "enable" : "disable", portnum, ret);
>> +
>> + return ret;
>> +}
>> +
>> static int ehci_platform_power_on(struct platform_device *dev)
>> {
>> struct usb_hcd *hcd = platform_get_drvdata(dev);
>> @@ -134,6 +183,7 @@ static struct hc_driver __read_mostly ehci_platform_hc_driver;
>> static const struct ehci_driver_overrides platform_overrides __initconst = {
>> .reset = ehci_platform_reset,
>> .extra_priv_size = sizeof(struct ehci_platform_priv),
>> + .port_power = ehci_platform_port_power,
>> };
>>
>> static struct usb_ehci_pdata ehci_platform_defaults = {
>>
>
> Otherwise, looks good to me. So,
>
> Reviewed-by: Roger Quadros <rogerq@ti.com>
>

Thanks!
\
 
 \ /
  Last update: 2018-03-01 09:48    [W:1.168 / U:0.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site