lkml.org 
[lkml]   [2018]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 3/5] USB: serial: f81232: enable remote wakeup via RX/RI pin
From
Date
Hi Johan,

Johan Hovold 於 2018/2/4 上午 09:46 寫道:
> On Thu, Feb 01, 2018 at 11:13:01AM +0800, Ji-Ze Hong (Peter Hong) wrote:
>> Our USB-To-Serial support RI/ RX remote wakeup by Modem, Fax or
>> other peripherals and we had tested it by following procedure with
>> device_set_wakeup_enable() enabled:
>> 1. Using pm-suspend to S3
>> 2. Trigger a pulse to RI/RX to wake up system.
>>
>> In our test, we can do remote wakeup only with
>> device_set_wakeup_enable() enabled.
>
> Yeah, but you need to enable it though sysfs. Not every device should be
> able to wake the system up. That's a decision left for user space.
>
>> Should we add device_set_wakeup_capable() & device_set_wakeup_enable()
>> like following link??
>> https://elixir.free-electrons.com/linux/latest/source/drivers/media/rc/mceusb.c#L1476
>
> No, your driver should not call device_set_wakeup_enable() itself. Just
> set the wakeup capable flag in probe. And if you can disable the wake up
> feature, this needs to be done at suspend depending on what user space
> has requested.

We'll change to device_set_wakeup_capable() and send the v2 patch when
test OK.

Thanks
--
With Best Regards,
Peter Hong

\
 
 \ /
  Last update: 2018-02-08 10:18    [W:0.045 / U:1.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site