lkml.org 
[lkml]   [2018]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] ARM: dts: imx6ull: add Toradex Colibri iMX6ULL support
On Thu, Feb 08, 2018 at 10:25:47AM +0100, stefan@agner.ch wrote:
> On 08.02.2018 08:47, Shawn Guo wrote:
> > On Tue, Feb 06, 2018 at 05:49:03PM +0100, Stefan Agner wrote:
> >> Add support for the Computer on Module Colibri iMX6ULL and its
> >> Bluetooth/Wifi variant along with the development/evaluation carrier
> >> board device trees. Follow the usual hierarchic include model,
> >> maintaining shared configuration in imx6ull-colibri.dtsi and
> >> imx6ull-colibri-eval-v3.dtsi respectively.
> >>
> >> Signed-off-by: Stefan Agner <stefan@agner.ch>
> >> ---
> >> This depends on the following patchsets work:
> >> - https://lkml.org/lkml/2018/1/6/129 (applied)
> >> - https://lkml.org/lkml/2018/1/10/998 (applied)
> >> - https://www.spinics.net/lists/arm-kernel/msg632671.html (pending, required)
> >> - https://lkml.org/lkml/2018/1/18/850 (only for highest CPU frequency)
> >
> > So the only dependency is the cpufreq change now. So we have two
> > options:
> >
> > 1. Hold the patch until the cpufreq change appear on my tree. That
> > will require us wait for another release cycle.
> >
> > 2. Drop the highest CPU frequency, so that we can apply the patch right
> > away, and add that setpoint after dependant cpufreq change lands
> > mainline.
>
> The way cpufreq currently works is that for everything higher than
> 396MHz it just will set the CPU parent to pll2_bus_clk which can go up
> to 528MHz. Also voltage should be within operation range even for
> 528MHz.
>
> So I think we can safely merge the current device tree.

Okay, thanks for the info. Patch applied.

Shawn

\
 
 \ /
  Last update: 2018-02-09 03:59    [W:0.040 / U:0.636 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site