lkml.org 
[lkml]   [2018]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 1/5] dt-bindings: mmc: document the stm32 sdmmc bindings
Date
From: Ludovic Barre <ludovic.barre@st.com>

Document the binding for stm32 sdmmc controller.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
---
.../devicetree/bindings/mmc/st,stm32-sdmmc.txt | 35 ++++++++++++++++++++++
1 file changed, 35 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mmc/st,stm32-sdmmc.txt

diff --git a/Documentation/devicetree/bindings/mmc/st,stm32-sdmmc.txt b/Documentation/devicetree/bindings/mmc/st,stm32-sdmmc.txt
new file mode 100644
index 0000000..74d0bff
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/st,stm32-sdmmc.txt
@@ -0,0 +1,35 @@
+* STMicroelectronics STM32 SDMMC controller
+
+The highspeed MMC host controller on STM32 soc family
+provides an interface for MMC, SD and SDIO types of memory cards.
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the sdmmc driver.
+
+Required properties:
+ - compatible: Should be "st,stm32h7-sdmmc"
+ - reg: mmc controller base registers
+ - interrupts: Should contain the interrupt number
+ - clocks: Should contain phandle for the clock feeding the controller
+ - resets: Should contain phandle for the reset feeding the controller
+
+Optional property:
+- st,dir-output-high: Allow to select direction polarity of external voltage
+ transceiver (which manage data and command direction).
+ if set: Voltage transceiver IOs are driven as output when direction signals are high,
+ else: Voltage transceiver IOs are driven as output when direction signals are low.
+- st,neg-edge: generate data & command on sdmmc clock falling edge
+- st,use-ckin: use sdmmc_ckin pin from an external driver to sample
+ the receive data (example: with voltage switch transceiver).
+
+Example:
+ sdmmc1: mmc@52007000 {
+ compatible = "st,stm32h7-sdmmc";
+ reg = <0x52007000 0x1000>;
+ interrupts = <49>;
+ clocks = <&rcc SDMMC1_CK>;
+ resets = <&rcc SDMMC1_R>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ };
--
2.7.4
\
 
 \ /
  Last update: 2018-02-28 16:49    [W:0.176 / U:0.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site