lkml.org 
[lkml]   [2018]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] dt-bindings: serial: stm32: add wakeup option using note
Date
Update bindings with interrupt-names and wakeup-source information

Signed-off-by: Bich Hemon <bich.hemon@st.com>
---
Documentation/devicetree/bindings/serial/st,stm32-usart.txt | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt
index d150b04..aaeb564 100644
--- a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt
+++ b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt
@@ -10,6 +10,7 @@ Required properties:
- interrupts:
- The interrupt line for the USART instance,
- An optional wake-up interrupt.
+- interrupt-names: Contains "event" for the USART interrupt line.
- clocks: The input clock of the USART instance

Optional properties:
@@ -17,6 +18,9 @@ Optional properties:
- st,hw-flow-ctrl: bool flag to enable hardware flow control.
- dmas: phandle(s) to DMA controller node(s). Refer to stm32-dma.txt
- dma-names: "rx" and/or "tx"
+- wakeup-source: bool flag to indicate this device has wakeup capabilities
+- interrupt-names : Should contain "wakeup" if optional wake-up interrupt is
+ used.

Examples:
usart4: serial@40004c00 {
--
1.9.1
\
 
 \ /
  Last update: 2018-02-28 11:53    [W:0.154 / U:0.916 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site