lkml.org 
[lkml]   [2018]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] gpio: raspberrypi-ext: fix firmware dependency
Hi Arnd,

Thanks for the fix.

On Wed, Feb 28, 2018 at 02:48:08PM +0100, Arnd Bergmann wrote:
> When the firmware driver is a loadable module, the gpio driver cannot be
> built-in:
>
> drivers/gpio/gpio-raspberrypi-exp.o: In function `rpi_exp_gpio_set':
> gpio-raspberrypi-exp.c:(.text+0xb4): undefined reference to `rpi_firmware_property'
> drivers/gpio/gpio-raspberrypi-exp.o: In function `rpi_exp_gpio_get':
> gpio-raspberrypi-exp.c:(.text+0x1ec): undefined reference to `rpi_firmware_property'
> drivers/gpio/gpio-raspberrypi-exp.o: In function `rpi_exp_gpio_get_direction':
> gpio-raspberrypi-exp.c:(.text+0x360): undefined reference to `rpi_firmware_property'
> drivers/gpio/gpio-raspberrypi-exp.o: In function `rpi_exp_gpio_get_polarity':
> gpio-raspberrypi-exp.c:(.text+0x4d4): undefined reference to `rpi_firmware_property'
> drivers/gpio/gpio-raspberrypi-exp.o: In function `rpi_exp_gpio_dir_out':
> gpio-raspberrypi-exp.c:(.text+0x670): undefined reference to `rpi_firmware_property'
> drivers/gpio/gpio-raspberrypi-exp.o:gpio-raspberrypi-exp.c:(.text+0x7fc): more undefined references to `rpi_firmware_property' follow
> drivers/gpio/gpio-raspberrypi-exp.o: In function `rpi_exp_gpio_dir_in':
> drivers/gpio/gpio-raspberrypi-exp.o: In function `rpi_exp_gpio_probe':
> gpio-raspberrypi-exp.c:(.text+0x93c): undefined reference to `rpi_firmware_get'
>
> We already have a Kconfig dependency for it, but when compile-testing, it
> is disregarded.
>
> This changes the dependency so that compile-testing is only done when the
> firmware driver is completely disabled.

What about the CONFIG_ARCH_BCM2835=y case? The combination of
CONFIG_GPIO_RASPBERRYPI_EXP=y and CONFIG_RASPBERRYPI_FIRMWARE=m is still
valid. Wouldn't that break the build?

Isn't there a way in Kconfig to force CONFIG_GPIO_RASPBERRYPI_EXP=m when
CONFIG_RASPBERRYPI_FIRMWARE=m?

What about 'depends on m || RASPBERRYPI_FIRMWARE=y'?

Grepping around I also found this:

drivers/power/supply/Kconfig: depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'

And this:

drivers/infiniband/Kconfig: depends on m || IPV6 != m

> Fixes: a98d90e7d588 ("gpio: raspberrypi-exp: Driver for RPi3 GPIO expander via mailbox service")
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> drivers/gpio/Kconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index 2ecd2adbaec6..52a8b0a6f4e1 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -126,7 +126,7 @@ config GPIO_RASPBERRYPI_EXP
> tristate "Raspberry Pi 3 GPIO Expander"
> default RASPBERRYPI_FIRMWARE
> depends on OF_GPIO
> - depends on (ARCH_BCM2835 && RASPBERRYPI_FIRMWARE) || COMPILE_TEST
> + depends on (ARCH_BCM2835 && RASPBERRYPI_FIRMWARE) || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE)

This is really non-obvious. An inline comment here might help, IMO.

> help
> Turn on GPIO support for the expander on Raspberry Pi 3 boards, using
> the firmware mailbox to communicate with VideoCore on BCM283x chips.

baruch

--
http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch@tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -
\
 
 \ /
  Last update: 2018-02-28 22:56    [W:0.069 / U:0.624 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site