Messages in this thread | | | From | Andy Shevchenko <> | Date | Tue, 27 Feb 2018 17:59:20 +0200 | Subject | Re: [PATCH v3 0/2] add support for Socionext SynQuacer I2C controller |
| |
On Tue, Feb 27, 2018 at 1:01 PM, Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote: > Add a binding and a driver for the I2C IP found in the Socionext SynQuacer > SoC, which is essentially a rebranded version of the Fujitsu F_I2C controller. >
Thanks for an update! FWIW, Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
P.S. clk_prepare_enable() may fail in ->probe() as well.
> v3: > - incorporate more of Andy's review comments (#2), especially regarding the > bus speed and clock source handling for ACPI > - patch #1 unchanged. > > v2: > - incorporate Andy's review comments (#2) > - patch #1 unchanged. > > Ard Biesheuvel (2): > dt-bindings: i2c: add binding for Socionext SynQuacer I2C > i2c: add support for Socionext SynQuacer I2C controller > > Documentation/devicetree/bindings/i2c/i2c-synquacer.txt | 29 + > drivers/i2c/busses/Kconfig | 10 + > drivers/i2c/busses/Makefile | 1 + > drivers/i2c/busses/i2c-synquacer.c | 787 ++++++++++++++++++++ > 4 files changed, 827 insertions(+) > create mode 100644 Documentation/devicetree/bindings/i2c/i2c-synquacer.txt > create mode 100644 drivers/i2c/busses/i2c-synquacer.c > > -- > 2.11.0 >
-- With Best Regards, Andy Shevchenko
| |