Messages in this thread | | | From | Roger Quadros <> | Subject | [PATCH v2 0/2] usb: dwc3: Add dual-role support using OTG core | Date | Tue, 27 Feb 2018 13:29:10 +0200 |
| |
Hi Felipe,
Some platforms (e.g. TI's AM437x) don't have USB ID pin state available over GPIO/extcon but need to rely on the DWC3 core's OTG block to get the ID pin state instead.
This series implements simple dual-role functionality using DWC3's OTG block. Debugfs 'mode' override is also functional so user can switch between "otg", "host" or "device" modes for debug.
Although system suspend/resume isn't working yet in mainline for AM437x, I've tested this series for system suspend/resume using a local tree.
Roger Quadros (2): usb: dwc3: core.h: add some register definitions usb: dwc3: add dual role support using OTG block
drivers/usb/dwc3/core.c | 67 ++++++- drivers/usb/dwc3/core.h | 111 +++++++++++ drivers/usb/dwc3/drd.c | 489 ++++++++++++++++++++++++++++++++++++++++++++++-- 3 files changed, 639 insertions(+), 28 deletions(-)
-- cheers, -roger
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
| |