lkml.org 
[lkml]   [2018]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 03/10] arm64: dts: renesas: draak: Override EtherAVB phy-mode
Date
As the PHY interface installed on the Draak board, provides TX
channel delay, make the "phy-mode" property a board-specific one, meant
to override the one specified in the SoC DTSI.

Follow up patches will reset the r8a77995 SoC DTSI to use "rgmii" mode
and let the board file override that.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
index af07da2..af18a09 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
@@ -108,6 +108,7 @@
pinctrl-names = "default";
renesas,no-ether-link;
phy-handle = <&phy0>;
+ phy-mode = "rgmii-txid";
status = "okay";

phy0: ethernet-phy@0 {
--
2.7.4
\
 
 \ /
  Last update: 2018-02-27 11:26    [W:0.141 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site