lkml.org 
[lkml]   [2018]   [Feb]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 08/15] drm/sun4i: Fix polarity configuration for DW HDMI PHY
Date
Hi,

Dne ponedeljek, 26. februar 2018 ob 10:39:30 CET je Maxime Ripard napisal(a):
> Hi,
>
> On Sat, Feb 24, 2018 at 10:45:38PM +0100, Jernej Skrabec wrote:
> > Current polarity configuration code is cleary wrong since it compares
> > same flag two times. However, even if flag name is fixed, it won't work
> > well for resolutions which have one polarity positive and another
> > negative.
> >
> > Fix that by properly set each bit according to each polarity. Since
> > those two bits are not described in any documentation, relationships
> > were obtained by experimentation.
> >
> > Fixes: b7c7436a5ff0 ("drm/sun4i: Implement A83T HDMI driver")
> >
> > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
> > ---
> >
> > drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 9 +++++----
> > 1 file changed, 5 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
> > b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c index e5bfcdd43ec9..f48e8b70fabe
> > 100644
> > --- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
> > +++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
> > @@ -35,10 +35,11 @@ static int sun8i_hdmi_phy_config(struct dw_hdmi *hdmi,
> > void *data,>
> > struct sun8i_hdmi_phy *phy = (struct sun8i_hdmi_phy *)data;
> > u32 val = 0;
> >
> > - if ((mode->flags & DRM_MODE_FLAG_NHSYNC) &&
> > - (mode->flags & DRM_MODE_FLAG_NHSYNC)) {
> > - val = 0x03;
> > - }
> > + if (mode->flags & DRM_MODE_FLAG_NHSYNC)
> > + val |= 0x01;
> > +
> > + if (mode->flags & DRM_MODE_FLAG_NVSYNC)
> > + val |= 0x02;
>
> Can you introduce defines for those?

Of course.

Best regards,
Jernej



\
 
 \ /
  Last update: 2018-02-26 17:20    [W:0.068 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site