lkml.org 
[lkml]   [2018]   [Feb]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 1/2] irqchip: stm32: Optimizes and cleans up stm32-exti irq_domain
From
Date
hi Radosław

On 02/23/2018 06:37 PM, Radosław Pietrzyk wrote:
> I don't fully get it to be honest. If interrupt is pending it must
> have been enabled (unmasked) and requires to be handled acked. It will
> be acked by irq_chip.irq_ack handler within the edge handler.
> Therefore this additional acking is meaningless.
>

Sorry, I did not see modification in pinctrl-stm32.c.
So it's ok for me

Acked-by: Ludovic Barre <ludovic.barre@st.com>
Tested-by: Ludovic Barre <ludovic.barre@st.com>

BR
Ludo
> 2018-02-23 16:46 GMT+01:00 Ludovic BARRE <ludovic.barre@st.com>:
>> hi Radoslaw
>>
>> The gpio-keys tests it's now functional on H7, great.
>> However the gpio-key test only the bank1 (like stm32f429).
>> Like the H7 introduce the multi-bank management,
>> we must perform complementary test.
>>
>> comment below about ack in handler
>>
>>
>> On 02/23/2018 09:31 AM, Radoslaw Pietrzyk wrote:
>>>
>>> - discards setting handle_simple_irq handler for hierarchy interrupts
>>> - removes acking in chained irq handler as this is done by
>>> irq_chip itself inside handle_edge_irq
>>> - removes unneeded irq_domain_ops.xlate callback
>>>
>>> Signed-off-by: Radoslaw Pietrzyk <radoslaw.pietrzyk@gmail.com>
>>> ---
>>> drivers/irqchip/irq-stm32-exti.c | 13 -------------
>>> 1 file changed, 13 deletions(-)
>>>
>>> diff --git a/drivers/irqchip/irq-stm32-exti.c
>>> b/drivers/irqchip/irq-stm32-exti.c
>>> index 36f0fbe..8013a87 100644
>>> --- a/drivers/irqchip/irq-stm32-exti.c
>>> +++ b/drivers/irqchip/irq-stm32-exti.c
>>> @@ -79,13 +79,6 @@ static unsigned long stm32_exti_pending(struct
>>> irq_chip_generic *gc)
>>> return irq_reg_readl(gc, stm32_bank->pr_ofst);
>>> }
>>> -static void stm32_exti_irq_ack(struct irq_chip_generic *gc, u32 mask)
>>> -{
>>> - const struct stm32_exti_bank *stm32_bank = gc->private;
>>> -
>>> - irq_reg_writel(gc, mask, stm32_bank->pr_ofst);
>>> -}
>>> -
>>> static void stm32_irq_handler(struct irq_desc *desc)
>>> {
>>> struct irq_domain *domain = irq_desc_get_handler_data(desc);
>>> @@ -106,7 +99,6 @@ static void stm32_irq_handler(struct irq_desc *desc)
>>> for_each_set_bit(n, &pending, IRQS_PER_BANK) {
>>> virq = irq_find_mapping(domain, irq_base +
>>> n);
>>> generic_handle_irq(virq);
>>> - stm32_exti_irq_ack(gc, BIT(n));
>>
>>
>> the while loop " while ((pending = " has been introduce while original
>> upstream of this driver in V2 to V3
>> https://patchwork.ozlabs.org/patch/604190/
>> https://patchwork.ozlabs.org/patch/665242/
>>
>> the "ack" is needed to acknowledge the irq which are handled and which is
>> not the original irq for which we enter.
>>
>>> }
>>> }
>>> }
>>> @@ -176,16 +168,12 @@ static int stm32_irq_set_wake(struct irq_data *data,
>>> unsigned int on)
>>> static int stm32_exti_alloc(struct irq_domain *d, unsigned int virq,
>>> unsigned int nr_irqs, void *data)
>>> {
>>> - struct irq_chip_generic *gc;
>>> struct irq_fwspec *fwspec = data;
>>> irq_hw_number_t hwirq;
>>> hwirq = fwspec->param[0];
>>> - gc = irq_get_domain_generic_chip(d, hwirq);
>>> irq_map_generic_chip(d, virq, hwirq);
>>> - irq_domain_set_info(d, virq, hwirq, &gc->chip_types->chip, gc,
>>> - handle_simple_irq, NULL, NULL);
>>
>>
>> I see if it is not disturb the multi-bank.
>>
>>> return 0;
>>> }
>>> @@ -200,7 +188,6 @@ static void stm32_exti_free(struct irq_domain *d,
>>> unsigned int virq,
>>> struct irq_domain_ops irq_exti_domain_ops = {
>>> .map = irq_map_generic_chip,
>>> - .xlate = irq_domain_xlate_onetwocell,
>>> .alloc = stm32_exti_alloc,
>>> .free = stm32_exti_free,
>>> };
>>>
>>
>> BR
>> Ludo

\
 
 \ /
  Last update: 2018-02-26 16:43    [W:1.092 / U:0.624 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site