lkml.org 
[lkml]   [2018]   [Feb]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: [PATCH 0/9] drm/xen-front: Add support for Xen PV display frontend
    From
    Date
    **

    *Hi, all!*

    *

    Last *Friday* some concerns on #dri-devel were raised wrt "yet

    another driver" for Xen and why not virtio-gpu. Let me highlight

    on why we need a new paravirtualized driver for Xen and why we

    can't just use virtio. Hope this helps the communities (both Xen

    and DRI) to have better understanding of this work and our motivation.


    Disclaimer: some or all of the below may sound weak argument or

    not 100% correct, so any help on clarifying the below is more

    than welcome ;)


    1. First of all, we are targeting ARM embedded use-cases and for

    ARM we do not use QEMU [1]: "...Xen on ARM is not just a straight

    1:1 port of x86 Xen... Xen on ARM does not need QEMU because it does

    not do any emulation. It accomplishes the goal by exploiting

    virtualization support in hardware as much as possible and using

    paravirtualized interfaces for IO."


    That being said it is still possible to run virtio-gpu and Xen+QEMU: [2]


    In this case QEMU can be used for device virtualization, e.g. network,

    block, console. But these already exist as Xen para-virtualized drivers

    again eliminating the need for QEMU: typical ARM system runs
    para-virtualized

    drivers for network, block, console etc.


    2. virtio-gpu requires PCI/MMIO emulation

    virtio-gpu (virtio-gpu-pci) require virtio-pci, but para-virtualized device

    drivers do not need this.


    3. No need for 3d/virgl.

    There are use-cases which either do not use OpenGL at all or will use

    custom virtualization solutions allowing sharing of a real GPU with guest,

    e.g. vGPU approach.


    4. More freedom for buffer allocation.

    As of now virtio-gpu is only capable of allocating buffers via TTM, while

    there are use-cases where we need to have more freedom:

    for systems which do not provide IOMMU support, but having specific

    requirements for display buffers, it is possible to allocate such buffers

    at backend side and share those with the frontend driver.

    For example, if host domain is 1:1 mapped and has DRM/GPU hardware expecting

    physically contiguous memory (in PA, not IPA), this allows implementing

    zero-copying use-cases.


    5. Zero-copying support at backend side

    Having native Xen implementation allows implementing zero-copying use-cases

    on backend side with the help of supporting driver DRM driver [3] which we

    hope to upstream as well (it is not yet ready in terms of code cleanup).


    6. QEMU backends for virtio-gpu cannot be used as is, e.g. guest displays

    could be just a part of the final user experience. Thus, a QEMU backend

    must be modified to interact, for example, with Automotive Grade Linux

    display manager. So, QEMU part needs modifications.

    In our use-case we have a backend which supports multi-touch and guest

    display(s) and running either as a weston client (which is not supported

    by QEMU at the moment?) or KMS/DRM client. This allows us to enable much

    more use-cases**without the need to run QEMU.

    *

    *Thank you,*

    **Oleksandr Andrushchenko*
    *

    *
    *

    *[1]
    https://wiki.xen.org/wiki/Xen_ARM_with_Virtualization_Extensions_whitepaper*

    *

    [2] https://elinux.org/R-Car/Virtualization

    [3]
    https://github.com/xen-troops/linux/blob/ces2018/drivers/gpu/drm/xen/xen_drm_zcopy_drv.c


    *


    On 02/21/2018 10:03 AM, Oleksandr Andrushchenko wrote:
    > From: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
    >
    > Hello!
    >
    > This patch series adds support for Xen [1] para-virtualized
    > frontend display driver. It implements the protocol from
    > include/xen/interface/io/displif.h [2].
    > Accompanying backend [3] is implemented as a user-space application
    > and its helper library [4], capable of running as a Weston client
    > or DRM master.
    > Configuration of both backend and frontend is done via
    > Xen guest domain configuration options [5].
    >
    > *******************************************************************************
    > * Driver limitations
    > *******************************************************************************
    > 1. Configuration options 1.1 (contiguous display buffers) and 2 (backend
    > allocated buffers) below are not supported at the same time.
    >
    > 2. Only primary plane without additional properties is supported.
    >
    > 3. Only one video mode supported which resolution is configured via XenStore.
    >
    > 4. All CRTCs operate at fixed frequency of 60Hz.
    >
    > *******************************************************************************
    > * Driver modes of operation in terms of display buffers used
    > *******************************************************************************
    > Depending on the requirements for the para-virtualized environment, namely
    > requirements dictated by the accompanying DRM/(v)GPU drivers running in both
    > host and guest environments, number of operating modes of para-virtualized
    > display driver are supported:
    > - display buffers can be allocated by either frontend driver or backend
    > - display buffers can be allocated to be contiguous in memory or not
    >
    > Note! Frontend driver itself has no dependency on contiguous memory for
    > its operation.
    >
    > *******************************************************************************
    > * 1. Buffers allocated by the frontend driver.
    > *******************************************************************************
    >
    > The below modes of operation are configured at compile-time via
    > frontend driver's kernel configuration.
    >
    > 1.1. Front driver configured to use GEM CMA helpers
    > This use-case is useful when used with accompanying DRM/vGPU driver in
    > guest domain which was designed to only work with contiguous buffers,
    > e.g. DRM driver based on GEM CMA helpers: such drivers can only import
    > contiguous PRIME buffers, thus requiring frontend driver to provide
    > such. In order to implement this mode of operation para-virtualized
    > frontend driver can be configured to use GEM CMA helpers.
    >
    > 1.2. Front driver doesn't use GEM CMA
    > If accompanying drivers can cope with non-contiguous memory then, to
    > lower pressure on CMA subsystem of the kernel, driver can allocate
    > buffers from system memory.
    >
    > Note! If used with accompanying DRM/(v)GPU drivers this mode of operation
    > may require IOMMU support on the platform, so accompanying DRM/vGPU
    > hardware can still reach display buffer memory while importing PRIME
    > buffers from the frontend driver.
    >
    > *******************************************************************************
    > * 2. Buffers allocated by the backend
    > *******************************************************************************
    >
    > This mode of operation is run-time configured via guest domain configuration
    > through XenStore entries.
    >
    > For systems which do not provide IOMMU support, but having specific
    > requirements for display buffers it is possible to allocate such buffers
    > at backend side and share those with the frontend.
    > For example, if host domain is 1:1 mapped and has DRM/GPU hardware expecting
    > physically contiguous memory, this allows implementing zero-copying
    > use-cases.
    >
    >
    > I would like to thank at least, but not at last the following
    > people/communities who helped this driver to happen ;)
    >
    > 1. My team at EPAM for continuous support
    > 2. Xen community for answering tons of questions on different
    > modes of operation of the driver with respect to virtualized
    > environment.
    > 3. Rob Clark for "GEM allocation for para-virtualized DRM driver" [6]
    > 4. Maarten Lankhorst for "Atomic driver and old remove FB behavior" [7]
    > 5. Ville Syrjälä for "Questions on page flips and atomic modeset" [8]
    >
    > Thank you,
    > Oleksandr Andrushchenko
    >
    > P.S. There are two dependencies for this driver limiting some of the
    > use-cases which are on review now:
    > 1. "drm/simple_kms_helper: Add {enable|disable}_vblank callback support" [9]
    > 2. "drm/simple_kms_helper: Fix NULL pointer dereference with no active CRTC" [10]
    >
    > [1] https://wiki.xen.org/wiki/Paravirtualization_(PV)#PV_IO_Drivers
    > [2] https://elixir.bootlin.com/linux/v4.16-rc2/source/include/xen/interface/io/displif.h
    > [3] https://github.com/xen-troops/displ_be
    > [4] https://github.com/xen-troops/libxenbe
    > [5] https://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=docs/man/xl.cfg.pod.5.in;h=a699367779e2ae1212ff8f638eff0206ec1a1cc9;hb=refs/heads/master#l1257
    > [6] https://lists.freedesktop.org/archives/dri-devel/2017-March/136038.html
    > [7] https://www.spinics.net/lists/dri-devel/msg164102.html
    > [8] https://www.spinics.net/lists/dri-devel/msg164463.html
    > [9] https://patchwork.freedesktop.org/series/38073/
    > [10] https://patchwork.freedesktop.org/series/38139/
    >
    > Oleksandr Andrushchenko (9):
    > drm/xen-front: Introduce Xen para-virtualized frontend driver
    > drm/xen-front: Implement Xen bus state handling
    > drm/xen-front: Read driver configuration from Xen store
    > drm/xen-front: Implement Xen event channel handling
    > drm/xen-front: Implement handling of shared display buffers
    > drm/xen-front: Introduce DRM/KMS virtual display driver
    > drm/xen-front: Implement KMS/connector handling
    > drm/xen-front: Implement GEM operations
    > drm/xen-front: Implement communication with backend
    >
    > drivers/gpu/drm/Kconfig | 2 +
    > drivers/gpu/drm/Makefile | 1 +
    > drivers/gpu/drm/xen/Kconfig | 30 ++
    > drivers/gpu/drm/xen/Makefile | 17 +
    > drivers/gpu/drm/xen/xen_drm_front.c | 712 ++++++++++++++++++++++++++++
    > drivers/gpu/drm/xen/xen_drm_front.h | 154 ++++++
    > drivers/gpu/drm/xen/xen_drm_front_cfg.c | 84 ++++
    > drivers/gpu/drm/xen/xen_drm_front_cfg.h | 45 ++
    > drivers/gpu/drm/xen/xen_drm_front_conn.c | 125 +++++
    > drivers/gpu/drm/xen/xen_drm_front_conn.h | 35 ++
    > drivers/gpu/drm/xen/xen_drm_front_drv.c | 294 ++++++++++++
    > drivers/gpu/drm/xen/xen_drm_front_drv.h | 73 +++
    > drivers/gpu/drm/xen/xen_drm_front_evtchnl.c | 399 ++++++++++++++++
    > drivers/gpu/drm/xen/xen_drm_front_evtchnl.h | 89 ++++
    > drivers/gpu/drm/xen/xen_drm_front_gem.c | 360 ++++++++++++++
    > drivers/gpu/drm/xen/xen_drm_front_gem.h | 46 ++
    > drivers/gpu/drm/xen/xen_drm_front_gem_cma.c | 93 ++++
    > drivers/gpu/drm/xen/xen_drm_front_kms.c | 299 ++++++++++++
    > drivers/gpu/drm/xen/xen_drm_front_kms.h | 30 ++
    > drivers/gpu/drm/xen/xen_drm_front_shbuf.c | 430 +++++++++++++++++
    > drivers/gpu/drm/xen/xen_drm_front_shbuf.h | 80 ++++
    > 21 files changed, 3398 insertions(+)
    > create mode 100644 drivers/gpu/drm/xen/Kconfig
    > create mode 100644 drivers/gpu/drm/xen/Makefile
    > create mode 100644 drivers/gpu/drm/xen/xen_drm_front.c
    > create mode 100644 drivers/gpu/drm/xen/xen_drm_front.h
    > create mode 100644 drivers/gpu/drm/xen/xen_drm_front_cfg.c
    > create mode 100644 drivers/gpu/drm/xen/xen_drm_front_cfg.h
    > create mode 100644 drivers/gpu/drm/xen/xen_drm_front_conn.c
    > create mode 100644 drivers/gpu/drm/xen/xen_drm_front_conn.h
    > create mode 100644 drivers/gpu/drm/xen/xen_drm_front_drv.c
    > create mode 100644 drivers/gpu/drm/xen/xen_drm_front_drv.h
    > create mode 100644 drivers/gpu/drm/xen/xen_drm_front_evtchnl.c
    > create mode 100644 drivers/gpu/drm/xen/xen_drm_front_evtchnl.h
    > create mode 100644 drivers/gpu/drm/xen/xen_drm_front_gem.c
    > create mode 100644 drivers/gpu/drm/xen/xen_drm_front_gem.h
    > create mode 100644 drivers/gpu/drm/xen/xen_drm_front_gem_cma.c
    > create mode 100644 drivers/gpu/drm/xen/xen_drm_front_kms.c
    > create mode 100644 drivers/gpu/drm/xen/xen_drm_front_kms.h
    > create mode 100644 drivers/gpu/drm/xen/xen_drm_front_shbuf.c
    > create mode 100644 drivers/gpu/drm/xen/xen_drm_front_shbuf.h
    >

    \
     
     \ /
      Last update: 2018-02-26 09:21    [W:2.152 / U:0.048 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site