lkml.org 
[lkml]   [2018]   [Feb]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 01/15] clk: sunxi-ng: Add check for minimal rate to NM PLLs
On Mon, Feb 26, 2018 at 6:25 PM, Maxime Ripard
<maxime.ripard@bootlin.com> wrote:
> On Mon, Feb 26, 2018 at 05:43:01PM +0800, Chen-Yu Tsai wrote:
>> On Mon, Feb 26, 2018 at 5:38 PM, Maxime Ripard
>> <maxime.ripard@bootlin.com> wrote:
>> > Hi,
>> >
>> > On Sat, Feb 24, 2018 at 10:45:31PM +0100, Jernej Skrabec wrote:
>> >> Some NM PLLs doesn't work well when their output clock rate is set below
>> >> certain rate.
>> >>
>> >> Add support for that constrain.
>> >
>> > In such a case, you should round the rate to the minimum the clock can
>> > operate at, and not return an error.
>>
>> That's true for round_rate. But what's the expected behavior of set_rate?
>> AFAIK we presume all users call round_rate before set_rate, but that doesn't
>> seem to be true all the time.
>
> One of the first things that happens during a set_rate is a round_rate:
> https://elixir.bootlin.com/linux/v4.16-rc3/source/drivers/clk/clk.c#L1873

Ah! This was added recently in commit ca5e089a32c5 ("clk: use round rate
to bail out early in set_rate").

Thanks for the tip!
ChenYu

\
 
 \ /
  Last update: 2018-02-26 11:29    [W:0.059 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site