lkml.org 
[lkml]   [2018]   [Feb]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/4] ARM: dtsi: add pwm node for sun8i.
On Sun, Feb 25, 2018 at 09:51:34PM +0800, hao_zhang wrote:
> This patch adds pwm node for sun8i.
>
> Signed-off-by: hao_zhang <hao5781286@gmail.com>
> ---
> arch/arm/boot/dts/sun8i-r40.dtsi | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
> index 173dcc1..99a0261 100644
> --- a/arch/arm/boot/dts/sun8i-r40.dtsi
> +++ b/arch/arm/boot/dts/sun8i-r40.dtsi
> @@ -295,6 +295,11 @@
> bias-pull-up;
> };
>
> + pwm_ch0_pin: pwm-ch0-pin {
> + pins = "PB2";
> + function = "pwm";
> + };
> +
> uart0_pb_pins: uart0-pb-pins {
> pins = "PB22", "PB23";
> function = "uart0";
> @@ -306,6 +311,14 @@
> reg = <0x01c20c90 0x10>;
> };
>
> + pwm: pwm@1c23400 {
> + compatible = "allwinner,sun8i-r40-pwm";
> + reg = <0x01c23400 0x154>;

The size must be the size of the whole memory block allocated to the
controller, so that would be 0x400 in this case.

Maxime

--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-02-26 09:50    [W:0.063 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site