Messages in this thread Patch in this message | | | From | Zhiyong Tao <> | Subject | [PATCH v2 4/4] pintcrl: support bias-disable of generic and special pins simultaneously | Date | Mon, 26 Feb 2018 16:34:02 +0800 |
| |
For generic pins, parameter "arg" is 0 or 1. For special pins, bias-disable is set by R0R1, so we need transmited "00" to set bias-disable When we set "bias-disable" as high-z property, the parameter should be "MTK_PUPD_SET_R1R0_00".
Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com> --- drivers/pinctrl/mediatek/pinctrl-mtk-common.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c index 3cf384f..e88ba04 100644 --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c @@ -301,8 +301,17 @@ static int mtk_pconf_set_pull_select(struct mtk_pinctrl *pctl, * resistor bit, so we need this special handle. */ if (pctl->devdata->spec_pull_set) { - ret = pctl->devdata->spec_pull_set(mtk_get_regmap(pctl, pin), - pin, pctl->devdata->port_align, isup, arg); + if (enable) { + ret = pctl->devdata->spec_pull_set( + mtk_get_regmap(pctl, pin), pin, + pctl->devdata->port_align, isup, + arg); + } else { + ret = pctl->devdata->spec_pull_set( + mtk_get_regmap(pctl, pin), pin, + pctl->devdata->port_align, isup, + MTK_PUPD_SET_R1R0_00); + } if (!ret) return 0; } -- 1.9.1
| |