lkml.org 
[lkml]   [2018]   [Feb]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 09/10] watchdog/hpwdt: Add dynamic debug
Date
Add a few dynamic debug messages to aid in module level debug.

Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
---
drivers/watchdog/hpwdt.c | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
index be7b3edac56c..b5fb2663c2a1 100644
--- a/drivers/watchdog/hpwdt.c
+++ b/drivers/watchdog/hpwdt.c
@@ -59,6 +59,7 @@ static int hpwdt_start(struct watchdog_device *wdd)
int control = 0x81 | (pretimeout ? 0x4 : 0);
int reload = SECS_TO_TICKS(wdd->timeout);

+ dev_dbg(wdd->parent, "start watchdog 0x%08x:0x%02x\n", reload, control);
iowrite16(reload, hpwdt_timer_reg);
iowrite8(control, hpwdt_timer_con);

@@ -69,6 +70,8 @@ static void hpwdt_stop(void)
{
unsigned long data;

+ pr_debug("stop watchdog\n");
+
data = ioread8(hpwdt_timer_con);
data &= 0xFE;
iowrite8(data, hpwdt_timer_con);
@@ -85,6 +88,7 @@ static int hpwdt_ping(struct watchdog_device *wdd)
{
int reload = SECS_TO_TICKS(wdd->timeout);

+ dev_dbg(wdd->parent, "ping watchdog 0x%08x\n", reload);
iowrite16(reload, hpwdt_timer_reg);

return 0;
@@ -98,8 +102,11 @@ static unsigned int hpwdt_gettimeleft(struct watchdog_device *wdd)

static int hpwdt_settimeout(struct watchdog_device *wdd, unsigned int val)
{
+ dev_dbg(wdd->parent, "set_timeout = %d\n", val);
+
wdd->timeout = val;
if (val <= wdd->pretimeout) {
+ dev_dbg(wdd->parent, "pretimeout < timeout. Setting to zero\n");
wdd->pretimeout = 0;
pretimeout = 0;
if (watchdog_active(wdd))
@@ -115,12 +122,16 @@ static int hpwdt_set_pretimeout(struct watchdog_device *wdd, unsigned int req)
{
unsigned int val = 0;

+ dev_dbg(wdd->parent, "set_pretimeout = %d\n", req);
if (req) {
val = PRETIMEOUT_SEC;
if (val >= wdd->timeout)
return -EINVAL;
}

+ if (val != req)
+ dev_dbg(wdd->parent, "Rounding pretimeout to: %d\n", val);
+
wdd->pretimeout = val;
pretimeout = !!val;

--
2.13.6
\
 
 \ /
  Last update: 2018-02-25 22:34    [W:0.056 / U:3.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site