lkml.org 
[lkml]   [2018]   [Feb]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 10/10] ARM: sunxi: smp: Add initialization of CNTVOFF
On Fri, Feb 23, 2018 at 02:37:42PM +0100, Mylène Josserand wrote:
> On Cortex-A7, the CNTVOFF register from arch timer is uninitialized.
> It should be done by the bootloader but it is currently not the case,
> even for boot CPU because this SoC is booting in secure mode.
> It leads to an random offset value meaning that each CPU will have a
> different time, which isn't working very well.
>
> Add assembly code used for boot CPU and secondary CPU cores to make
> sure that the CNTVOFF register is initialized.
>
> Signed-off-by: Mylène Josserand <mylene.josserand@bootlin.com>
> ---
> arch/arm/mach-sunxi/headsmp.S | 21 +++++++++++++++++++++
> arch/arm/mach-sunxi/sunxi.c | 4 ++++
> 2 files changed, 25 insertions(+)
>
> diff --git a/arch/arm/mach-sunxi/headsmp.S b/arch/arm/mach-sunxi/headsmp.S
> index d5c97e945e69..605896251927 100644
> --- a/arch/arm/mach-sunxi/headsmp.S
> +++ b/arch/arm/mach-sunxi/headsmp.S
> @@ -65,9 +65,30 @@ ENTRY(sunxi_mc_smp_cluster_cache_enable)
> first: .word sunxi_mc_smp_first_comer - .
> ENDPROC(sunxi_mc_smp_cluster_cache_enable)
>
> +ENTRY(sunxi_init_cntvoff)
> + /*
> + * CNTVOFF has to be initialized either from non-secure Hypervisor
> + * mode or secure Monitor mode with SCR.NS==1. If TrustZone is enabled
> + * then it should be handled by the secure code
> + */
> + cps #MON_MODE
> + mrc p15, 0, r1, c1, c1, 0 /* Get Secure Config */
> + orr r0, r1, #1
> + mcr p15, 0, r0, c1, c1, 0 /* Set Non Secure bit */
> + instr_sync
> + mov r0, #0
> + mcrr p15, 4, r0, r0, c14 /* CNTVOFF = 0 */
> + instr_sync
> + mcr p15, 0, r1, c1, c1, 0 /* Set Secure bit */
> + instr_sync
> + cps #SVC_MODE
> + ret lr
> +ENDPROC(sunxi_init_cntvoff)
> +
> #ifdef CONFIG_SMP
> ENTRY(sunxi_boot)
> bl sunxi_mc_smp_cluster_cache_enable
> + bl sunxi_init_cntvoff
> b secondary_startup
> ENDPROC(sunxi_boot)
>
> diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
> index 5e9602ce1573..4bb041492b54 100644
> --- a/arch/arm/mach-sunxi/sunxi.c
> +++ b/arch/arm/mach-sunxi/sunxi.c
> @@ -37,8 +37,12 @@ static const char * const sun6i_board_dt_compat[] = {
> };
>
> extern void __init sun6i_reset_init(void);
> +extern void sunxi_init_cntvoff(void);
> +
> static void __init sun6i_timer_init(void)
> {
> + sunxi_init_cntvoff();
> +

This would deserve a comment explaining why this is needed in the
first place, and this is not correct. All the other SoCs listed in
that machine have their CNTVOFF setup correctly on CPU0, and since
Linux is booted in HYP, it's probably not even valid to do that.

Maxime

--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-02-23 16:13    [W:0.208 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site