Messages in this thread | | | Subject | Re: [PATCH] dt-bindings: iio: adc: sd-modulator: fix io-channel-cells | From | Arnaud Pouliquen <> | Date | Fri, 23 Feb 2018 14:46:19 +0100 |
| |
Hello,
Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Regards, Arnaud
On 02/23/2018 12:07 PM, Fabrice Gasnier wrote: > io-channel-cells should be <0> since sigma delta modulator exports only > one channel, as described in ../iio/iio-bindings.txt "IIO providers" > section. Only the phandle is necessary for IIO consumers in this case. > > Fixes: af11143757b7 ("IIO: Add DT bindings for sigma delta adc modulator") > > Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> > --- > Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt > index e9ebb8a..ba24ca7 100644 > --- a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt > +++ b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt > @@ -3,11 +3,11 @@ Device-Tree bindings for sigma delta modulator > Required properties: > - compatible: should be "ads1201", "sd-modulator". "sd-modulator" can be use > as a generic SD modulator if modulator not specified in compatible list. > -- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers". > +- #io-channel-cells = <0>: See the IIO bindings section "IIO consumers". > > Example node: > > ads1202: adc@0 { > compatible = "sd-modulator"; > - #io-channel-cells = <1>; > + #io-channel-cells = <0>; > }; >
| |