lkml.org 
[lkml]   [2018]   [Feb]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/9] serial: arc_uart: Fix out-of-bounds access through DT alias
Date
The arc_uart_ports[] array is indexed using a value derived from the
"serialN" alias in DT, which may lead to an out-of-bounds access.

Fix this by adding a range check.

Note that the array size is defined by a Kconfig symbol
(CONFIG_SERIAL_ARC_NR_PORTS), so this can even be triggered using a
legitimate DTB.

Fixes: ea28fd56fcde69af ("serial/arc-uart: switch to devicetree based probing")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
- Fix Fixes reference,
- Use ARRAY_SIZE().
---
drivers/tty/serial/arc_uart.c | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c
index 2599f9ecccfe7769..d904a3a345e74785 100644
--- a/drivers/tty/serial/arc_uart.c
+++ b/drivers/tty/serial/arc_uart.c
@@ -593,6 +593,11 @@ static int arc_serial_probe(struct platform_device *pdev)
if (dev_id < 0)
dev_id = 0;

+ if (dev_id >= ARRAY_SIZE(arc_uart_ports)) {
+ dev_err(&pdev->dev, "serial%d out of range\n", dev_id);
+ return -EINVAL;
+ }
+
uart = &arc_uart_ports[dev_id];
port = &uart->port;

--
2.7.4
\
 
 \ /
  Last update: 2018-02-23 14:41    [W:0.059 / U:0.432 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site