lkml.org 
[lkml]   [2018]   [Feb]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 7/7] iio: adc: stm32-dfsdm: add check on spi-max-frequency
Date
spi-max-frequency is requested for SPI master mode (only), to tune output
clock. It may happen requested frequency isn't reachable.
Add explicit check, so probe fails with error in this case. Otherwise,
output clock may simply be silently turned off (conversions fail).

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
---
drivers/iio/adc/stm32-dfsdm-core.c | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/drivers/iio/adc/stm32-dfsdm-core.c b/drivers/iio/adc/stm32-dfsdm-core.c
index e50efdc..1d0d823 100644
--- a/drivers/iio/adc/stm32-dfsdm-core.c
+++ b/drivers/iio/adc/stm32-dfsdm-core.c
@@ -227,6 +227,11 @@ static int stm32_dfsdm_parse_of(struct platform_device *pdev,
}

priv->spi_clk_out_div = div_u64_rem(clk_freq, spi_freq, &rem) - 1;
+ if (!priv->spi_clk_out_div) {
+ /* spi_clk_out_div == 0 means ckout is OFF */
+ dev_err(&pdev->dev, "spi-max-frequency not achievable\n");
+ return -EINVAL;
+ }
priv->dfsdm.spi_master_freq = spi_freq;

if (rem) {
--
1.9.1
\
 
 \ /
  Last update: 2018-02-23 13:53    [W:0.131 / U:0.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site