lkml.org 
[lkml]   [2018]   [Feb]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 11/12] arm64: topology: enable ACPI/PPTT based CPU topology
On Thu, Jan 25, 2018 at 09:56:30AM -0600, Jeremy Linton wrote:
> Hi,
>
> On 01/25/2018 06:15 AM, Xiongfeng Wang wrote:
> >Hi Jeremy,
> >
> >I have tested the patch with the newest UEFI. It prints the below error:
> >
> >[ 4.017371] BUG: arch topology borken
> >[ 4.021069] BUG: arch topology borken
> >[ 4.024764] BUG: arch topology borken
> >[ 4.028460] BUG: arch topology borken
> >[ 4.032153] BUG: arch topology borken
> >[ 4.035849] BUG: arch topology borken
> >[ 4.039543] BUG: arch topology borken
> >[ 4.043239] BUG: arch topology borken
> >[ 4.046932] BUG: arch topology borken
> >[ 4.050629] BUG: arch topology borken
> >[ 4.054322] BUG: arch topology borken
> >
> >I checked the code and found that the newest UEFI set PPTT physical_package_flag on a physical package node and
> >the NUMA domain (SRAT domains) starts from the layer of DIE. (The topology of our board is core->cluster->die->package).
>
> I commented about that on the EDK2 mailing list. While the current spec
> doesn't explicitly ban having the flag set multiple times between the leaf
> and the root I consider it a "bug" and there is an effort to clarify the
> spec and the use of that flag.
> >
> >When the kernel starts to build sched_domain, the multi-core sched_domain contains all the cores within a package,
> >and the lowest NUMA sched_domain contains all the cores within a die. But the kernel requires that the multi-core
> >sched_domain should be a subset of the lowest NUMA sched_domain, so the BUG info is printed.
>
> Right. I've mentioned this problem a couple of times.
>
> At at the moment, the spec isn't clear about how the proximity domain is
> detected/located within the PPTT topology (a node with a 1:1 correspondence
> isn't even required). As you can see from this patch set, we are making the
> general assumption that the proximity domains are at the same level as the
> physical socket. This isn't ideal for NUMA topologies, like the D05, that
> don't align with the physical socket.
>
> There are efforts underway to clarify and expand upon the specification to
> deal with this general problem. The simple solution is another flag (say
> PPTT_PROXIMITY_DOMAIN which would map to the D05 die) which could be used to
> find nodes with 1:1 correspondence. At that point we could add a fairly
> trivial patch to correct just the scheduler topology without affecting the
> rest of the system topology code.

I think Morten asked already but isn't this the same end result we end
up having if we remove the DIE level if NUMA-within-package is detected
(instead of using the default_topology[]) and we create our own ARM64
domain hierarchy (with DIE level removed) through set_sched_topology()
accordingly ?

Put it differently: do we really need to rely on another PPTT flag to
collect this information ?

I can't merge code that breaks a platform with legitimate firmware
bindings.

Thanks,
Lorenzo

>
> >
> >If we modify the UEFI to make NUMA sched_domain start from the layer of package, then all the topology information
> >within the package will be discarded. I think we need to build the multi-core sched_domain using the cores within
> >the cluster instead of the cores within the package. I think that's what 'multi-core' means. Multi cores form a cluster. I guess.
> >If we build the multi-core sched_domain using the cores within a cluster, I think we need to add fields in struct cpu_topology
> >to record which cores are in each cluster.
>
> The problem is that there isn't a generic way to identify which level of
> cache sharing is the "correct" top layer MC domain. For one system cluster
> might be appropriate, for another it might be the highest caching level
> within a socket, for another is might be a something in between or a group
> of clusters or LLCs..
>
> Hence the effort to standardize/guarantee a PPTT node that exactly matches a
> SRAT domain. With that, each SOC/system provider has clearly defined method
> for communicating where they want the proximity domain information to begin.
>
> Thanks,
>
> >
> >
> >Thanks,
> >Xiongfeng
> >
> >On 2018/1/13 8:59, Jeremy Linton wrote:
> >>Propagate the topology information from the PPTT tree to the
> >>cpu_topology array. We can get the thread id, core_id and
> >>cluster_id by assuming certain levels of the PPTT tree correspond
> >>to those concepts. The package_id is flagged in the tree and can be
> >>found by calling find_acpi_cpu_topology_package() which terminates
> >>its search when it finds an ACPI node flagged as the physical
> >>package. If the tree doesn't contain enough levels to represent
> >>all of the requested levels then the root node will be returned
> >>for all subsequent levels.
> >>
> >>Cc: Juri Lelli <juri.lelli@arm.com>
> >>Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
> >>---
> >> arch/arm64/kernel/topology.c | 46 +++++++++++++++++++++++++++++++++++++++++++-
> >> 1 file changed, 45 insertions(+), 1 deletion(-)
> >>
> >>diff --git a/arch/arm64/kernel/topology.c b/arch/arm64/kernel/topology.c
> >>index 7b06e263fdd1..ce8ec7fd6b32 100644
> >>--- a/arch/arm64/kernel/topology.c
> >>+++ b/arch/arm64/kernel/topology.c
> >>@@ -11,6 +11,7 @@
> >> * for more details.
> >> */
> >>+#include <linux/acpi.h>
> >> #include <linux/arch_topology.h>
> >> #include <linux/cpu.h>
> >> #include <linux/cpumask.h>
> >>@@ -22,6 +23,7 @@
> >> #include <linux/sched.h>
> >> #include <linux/sched/topology.h>
> >> #include <linux/slab.h>
> >>+#include <linux/smp.h>
> >> #include <linux/string.h>
> >> #include <asm/cpu.h>
> >>@@ -300,6 +302,46 @@ static void __init reset_cpu_topology(void)
> >> }
> >> }
> >>+#ifdef CONFIG_ACPI
> >>+/*
> >>+ * Propagate the topology information of the processor_topology_node tree to the
> >>+ * cpu_topology array.
> >>+ */
> >>+static int __init parse_acpi_topology(void)
> >>+{
> >>+ bool is_threaded;
> >>+ int cpu, topology_id;
> >>+
> >>+ is_threaded = read_cpuid_mpidr() & MPIDR_MT_BITMASK;
> >>+
> >>+ for_each_possible_cpu(cpu) {
> >>+ topology_id = find_acpi_cpu_topology(cpu, 0);
> >>+ if (topology_id < 0)
> >>+ return topology_id;
> >>+
> >>+ if (is_threaded) {
> >>+ cpu_topology[cpu].thread_id = topology_id;
> >>+ topology_id = find_acpi_cpu_topology(cpu, 1);
> >>+ cpu_topology[cpu].core_id = topology_id;
> >>+ topology_id = find_acpi_cpu_topology_package(cpu);
> >>+ cpu_topology[cpu].package_id = topology_id;
> >>+ } else {
> >>+ cpu_topology[cpu].thread_id = -1;
> >>+ cpu_topology[cpu].core_id = topology_id;
> >>+ topology_id = find_acpi_cpu_topology_package(cpu);
> >>+ cpu_topology[cpu].package_id = topology_id;
> >>+ }
> >>+ }
> >>+
> >>+ return 0;
> >>+}
> >>+
> >>+#else
> >>+static inline int __init parse_acpi_topology(void)
> >>+{
> >>+ return -EINVAL;
> >>+}
> >>+#endif
> >> void __init init_cpu_topology(void)
> >> {
> >>@@ -309,6 +351,8 @@ void __init init_cpu_topology(void)
> >> * Discard anything that was parsed if we hit an error so we
> >> * don't use partial information.
> >> */
> >>- if (of_have_populated_dt() && parse_dt_topology())
> >>+ if ((!acpi_disabled) && parse_acpi_topology())
> >>+ reset_cpu_topology();
> >>+ else if (of_have_populated_dt() && parse_dt_topology())
> >> reset_cpu_topology();
> >> }
> >>
> >
>

\
 
 \ /
  Last update: 2018-02-23 12:04    [W:0.102 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site