lkml.org 
[lkml]   [2018]   [Feb]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 10/11] test_firmware: add a library for shared helpers
Date
Both fw_fallback.sh and fw_filesystem.sh share a common set of
boiler plate setup and tests. We can share these in a common place.
While at it, move both test to use /bin/bash.

Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
---
tools/testing/selftests/firmware/fw_fallback.sh | 69 ++-----------
tools/testing/selftests/firmware/fw_filesystem.sh | 61 ++---------
tools/testing/selftests/firmware/fw_lib.sh | 120 ++++++++++++++++++++++
3 files changed, 137 insertions(+), 113 deletions(-)
create mode 100755 tools/testing/selftests/firmware/fw_lib.sh

diff --git a/tools/testing/selftests/firmware/fw_fallback.sh b/tools/testing/selftests/firmware/fw_fallback.sh
index 40b6c1d3e832..0db1c09a6bcc 100755
--- a/tools/testing/selftests/firmware/fw_fallback.sh
+++ b/tools/testing/selftests/firmware/fw_fallback.sh
@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
# This validates that the kernel will fall back to using the fallback mechanism
# to load firmware it can't find on disk itself. We must request a firmware
@@ -6,68 +6,17 @@
# won't find so that we can do the load ourself manually.
set -e

-PROC_CONFIG="/proc/config.gz"
+TEST_REQS_FW_SYSFS_FALLBACK="yes"
+TEST_REQS_FW_SET_CUSTOM_PATH="no"
TEST_DIR=$(dirname $0)
+source $TEST_DIR/fw_lib.sh

-modprobe test_firmware
-if [ ! -f $PROC_CONFIG ]; then
- if modprobe configs 2>/dev/null; then
- echo "Loaded configs module"
- if [ ! -f $PROC_CONFIG ]; then
- echo "You must have the following enabled in your kernel:" >&2
- cat $TEST_DIR/config >&2
- echo "Resorting to old heuristics" >&2
- fi
- else
- echo "Failed to load configs module, using old heuristics" >&2
- fi
-fi
-
-kconfig_has()
-{
- if [ -f $PROC_CONFIG ]; then
- if zgrep -q $1 $PROC_CONFIG 2>/dev/null; then
- echo "yes"
- else
- echo "no"
- fi
- else
- # We currently don't have easy heuristics to infer this
- # so best we can do is just try to use the kernel assuming
- # you had enabled it. This matches the old behaviour.
- if [ "$1" = "CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y" ]; then
- echo "yes"
- elif [ "$1" = "CONFIG_FW_LOADER_USER_HELPER=y" ]; then
- if [ -d /sys/class/firmware/ ]; then
- echo yes
- else
- echo no
- fi
- fi
- fi
-}
-
-DIR=/sys/devices/virtual/misc/test_firmware
-
-HAS_FW_LOADER_USER_HELPER=$(kconfig_has CONFIG_FW_LOADER_USER_HELPER=y)
-HAS_FW_LOADER_USER_HELPER_FALLBACK=$(kconfig_has CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y)
-
-if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
- OLD_TIMEOUT=$(cat /sys/class/firmware/timeout)
-else
- echo "usermode helper disabled so ignoring test"
- exit 0
-fi
-
-FWPATH=$(mktemp -d)
-FW="$FWPATH/test-firmware.bin"
+check_mods
+check_setup
+verify_reqs
+setup_tmp_file

-test_finish()
-{
- echo "$OLD_TIMEOUT" >/sys/class/firmware/timeout
- rm -f "$FW"
- rmdir "$FWPATH"
-}
+trap "test_finish" EXIT

load_fw()
{
diff --git a/tools/testing/selftests/firmware/fw_filesystem.sh b/tools/testing/selftests/firmware/fw_filesystem.sh
index f9508e1a4058..7f47877fa7fa 100755
--- a/tools/testing/selftests/firmware/fw_filesystem.sh
+++ b/tools/testing/selftests/firmware/fw_filesystem.sh
@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
# This validates that the kernel will load firmware out of its list of
# firmware locations on disk. Since the user helper does similar work,
@@ -6,52 +6,15 @@
# know so we can be sure we're not accidentally testing the user helper.
set -e

-DIR=/sys/devices/virtual/misc/test_firmware
+TEST_REQS_FW_SYSFS_FALLBACK="no"
+TEST_REQS_FW_SET_CUSTOM_PATH="yes"
TEST_DIR=$(dirname $0)
+source $TEST_DIR/fw_lib.sh

-test_modprobe()
-{
- if [ ! -d $DIR ]; then
- echo "$0: $DIR not present"
- echo "You must have the following enabled in your kernel:"
- cat $TEST_DIR/config
- exit 1
- fi
-}
-
-trap "test_modprobe" EXIT
-
-if [ ! -d $DIR ]; then
- modprobe test_firmware
-fi
-
-# CONFIG_FW_LOADER_USER_HELPER has a sysfs class under /sys/class/firmware/
-# These days most distros enable CONFIG_FW_LOADER_USER_HELPER but disable
-# CONFIG_FW_LOADER_USER_HELPER_FALLBACK. We use /sys/class/firmware/ as an
-# indicator for CONFIG_FW_LOADER_USER_HELPER.
-HAS_FW_LOADER_USER_HELPER=$(if [ -d /sys/class/firmware/ ]; then echo yes; else echo no; fi)
-
-if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
- OLD_TIMEOUT=$(cat /sys/class/firmware/timeout)
-fi
-
-OLD_FWPATH=$(cat /sys/module/firmware_class/parameters/path)
-
-FWPATH=$(mktemp -d)
-FW="$FWPATH/test-firmware.bin"
-
-test_finish()
-{
- if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
- echo "$OLD_TIMEOUT" >/sys/class/firmware/timeout
- fi
- if [ "$OLD_FWPATH" = "" ]; then
- OLD_FWPATH=" "
- fi
- echo -n "$OLD_FWPATH" >/sys/module/firmware_class/parameters/path
- rm -f "$FW"
- rmdir "$FWPATH"
-}
+check_mods
+check_setup
+verify_reqs
+setup_tmp_file

trap "test_finish" EXIT

@@ -60,14 +23,6 @@ if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
echo 1 >/sys/class/firmware/timeout
fi

-# Set the kernel search path.
-echo -n "$FWPATH" >/sys/module/firmware_class/parameters/path
-
-# This is an unlikely real-world firmware content. :)
-echo "ABCD0123" >"$FW"
-
-NAME=$(basename "$FW")
-
if printf '\000' >"$DIR"/trigger_request 2> /dev/null; then
echo "$0: empty filename should not succeed" >&2
exit 1
diff --git a/tools/testing/selftests/firmware/fw_lib.sh b/tools/testing/selftests/firmware/fw_lib.sh
new file mode 100755
index 000000000000..0702dbf0f06b
--- /dev/null
+++ b/tools/testing/selftests/firmware/fw_lib.sh
@@ -0,0 +1,120 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+# Library of helpers for test scripts.
+set -e
+
+DIR=/sys/devices/virtual/misc/test_firmware
+
+PROC_CONFIG="/proc/config.gz"
+TEST_DIR=$(dirname $0)
+
+print_reqs_exit()
+{
+ echo "You must have the following enabled in your kernel:" >&2
+ cat $TEST_DIR/config >&2
+ exit 1
+}
+
+test_modprobe()
+{
+ if [ ! -d $DIR ]; then
+ print_reqs_exit
+ fi
+}
+
+check_mods()
+{
+ trap "test_modprobe" EXIT
+ if [ ! -d $DIR ]; then
+ modprobe test_firmware
+ fi
+ if [ ! -f $PROC_CONFIG ]; then
+ if modprobe configs 2>/dev/null; then
+ echo "Loaded configs module"
+ if [ ! -f $PROC_CONFIG ]; then
+ echo "You must have the following enabled in your kernel:" >&2
+ cat $TEST_DIR/config >&2
+ echo "Resorting to old heuristics" >&2
+ fi
+ else
+ echo "Failed to load configs module, using old heuristics" >&2
+ fi
+ fi
+}
+
+check_setup()
+{
+ HAS_FW_LOADER_USER_HELPER=$(kconfig_has CONFIG_FW_LOADER_USER_HELPER=y)
+ HAS_FW_LOADER_USER_HELPER_FALLBACK=$(kconfig_has CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y)
+
+ if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
+ OLD_TIMEOUT=$(cat /sys/class/firmware/timeout)
+ fi
+
+ OLD_FWPATH=$(cat /sys/module/firmware_class/parameters/path)
+}
+
+verify_reqs()
+{
+ if [ "$TEST_REQS_FW_SYSFS_FALLBACK" = "yes" ]; then
+ if [ ! "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
+ echo "usermode helper disabled so ignoring test"
+ exit 1
+ fi
+ fi
+}
+
+setup_tmp_file()
+{
+ FWPATH=$(mktemp -d)
+ FW="$FWPATH/test-firmware.bin"
+ echo "ABCD0123" >"$FW"
+ NAME=$(basename "$FW")
+ if [ "$TEST_REQS_FW_SET_CUSTOM_PATH" = "yes" ]; then
+ echo -n "$FWPATH" >/sys/module/firmware_class/parameters/path
+ fi
+}
+
+test_finish()
+{
+ if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
+ echo "$OLD_TIMEOUT" >/sys/class/firmware/timeout
+ fi
+ if [ "$OLD_FWPATH" = "" ]; then
+ OLD_FWPATH=" "
+ fi
+ if [ "$TEST_REQS_FW_SET_CUSTOM_PATH" = "yes" ]; then
+ echo -n "$OLD_FWPATH" >/sys/module/firmware_class/parameters/path
+ fi
+ if [ -f $FW ]; then
+ rm -f "$FW"
+ fi
+ if [ -d $FWPATH ]; then
+ rm -rf "$FWPATH"
+ fi
+}
+
+kconfig_has()
+{
+ if [ -f $PROC_CONFIG ]; then
+ if zgrep -q $1 $PROC_CONFIG 2>/dev/null; then
+ echo "yes"
+ else
+ echo "no"
+ fi
+ else
+ # We currently don't have easy heuristics to infer this
+ # so best we can do is just try to use the kernel assuming
+ # you had enabled it. This matches the old behaviour.
+ if [ "$1" = "CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y" ]; then
+ echo "yes"
+ elif [ "$1" = "CONFIG_FW_LOADER_USER_HELPER=y" ]; then
+ if [ -d /sys/class/firmware/ ]; then
+ echo yes
+ else
+ echo no
+ fi
+ fi
+ fi
+}
--
2.16.2
\
 
 \ /
  Last update: 2018-02-24 03:49    [W:0.512 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site