lkml.org 
[lkml]   [2018]   [Feb]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] scsi: lpfc: use memcpy_toio instead of writeq
On Fri, Feb 23, 2018 at 4:36 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> @@ -138,12 +137,10 @@ lpfc_sli4_wq_put(struct lpfc_queue *q, union lpfc_wqe *wqe)
> if (q->phba->sli3_options & LPFC_SLI4_PHWQ_ENABLED)
> bf_set(wqe_wqid, &wqe->generic.wqe_com, q->queue_id);
> lpfc_sli_pcimem_bcopy(wqe, temp_wqe, q->entry_size);
> - if (q->dpp_enable && q->phba->cfg_enable_dpp) {
> + if (q->dpp_enable && q->phba->cfg_enable_dpp)
> /* write to DPP aperture taking advatage of Combined Writes */
> - tmp = (uint8_t *)wqe;
> - for (i = 0; i < q->entry_size; i += sizeof(uint64_t))
> - writeq(*((uint64_t *)(tmp + i)), q->dpp_regaddr + i);
> - }
> + memcpy_toio(tmp, q->dpp_regaddr, q->entry_size);
> +
> /* ensure WQE bcopy and DPP flushed before doorbell write */
> wmb();
>

Not sure where we are with the question of whether memcpy_toio
is a good replacement or not, but further build testing showed that
my patch was completely broken in more than one way:

I mixed up the source and destination arguments, and I used
the uninitialized 'tmp' instead of 'wqe'. Don't try this patch.

Arnd

\
 
 \ /
  Last update: 2018-02-23 22:03    [W:0.101 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site