lkml.org 
[lkml]   [2018]   [Feb]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 4.4 106/193] mtd: sh_flctl: pass FIFO as physical address
    Date
    4.4-stable review patch.  If anyone has any objections, please let me know.

    ------------------

    From: Arnd Bergmann <arnd@arndb.de>

    commit 1873315fb156cbc8e46f28e8b128f17ff6c31728 upstream.

    By convention, the FIFO address we pass using dmaengine_slave_config
    is a physical address in the form that is understood by the DMA
    engine, as a dma_addr_t, phys_addr_t or resource_size_t.

    The sh_flctl driver however passes a virtual __iomem address that
    gets cast to dma_addr_t in the slave driver. This happens to work
    on shmobile because that platform sets up an identity mapping for
    its MMIO regions, but such code is not portable to other platforms,
    and prevents us from ever changing the platform mapping or reusing
    the driver on other architectures like ARM64 that might not have the
    mapping.

    We also get a warning about a type mismatch for the case that
    dma_addr_t is wider than a pointer, i.e. when CONFIG_LPAE is set:

    drivers/mtd/nand/sh_flctl.c: In function 'flctl_setup_dma':
    drivers/mtd/nand/sh_flctl.c:163:17: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
    cfg.dst_addr = (dma_addr_t)FLDTFIFO(flctl);

    This changes the driver to instead pass the physical address of
    the FIFO that is extracted from the MMIO resource, making the
    code more portable and avoiding the warning.

    Signed-off-by: Arnd Bergmann <arnd@arndb.de>
    Signed-off-by: Brian Norris <computersforpeace@gmail.com>
    Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

    ---
    drivers/mtd/nand/sh_flctl.c | 5 +++--
    include/linux/mtd/sh_flctl.h | 1 +
    2 files changed, 4 insertions(+), 2 deletions(-)

    --- a/drivers/mtd/nand/sh_flctl.c
    +++ b/drivers/mtd/nand/sh_flctl.c
    @@ -160,7 +160,7 @@ static void flctl_setup_dma(struct sh_fl

    memset(&cfg, 0, sizeof(cfg));
    cfg.direction = DMA_MEM_TO_DEV;
    - cfg.dst_addr = (dma_addr_t)FLDTFIFO(flctl);
    + cfg.dst_addr = flctl->fifo;
    cfg.src_addr = 0;
    ret = dmaengine_slave_config(flctl->chan_fifo0_tx, &cfg);
    if (ret < 0)
    @@ -176,7 +176,7 @@ static void flctl_setup_dma(struct sh_fl

    cfg.direction = DMA_DEV_TO_MEM;
    cfg.dst_addr = 0;
    - cfg.src_addr = (dma_addr_t)FLDTFIFO(flctl);
    + cfg.src_addr = flctl->fifo;
    ret = dmaengine_slave_config(flctl->chan_fifo0_rx, &cfg);
    if (ret < 0)
    goto err;
    @@ -1096,6 +1096,7 @@ static int flctl_probe(struct platform_d
    flctl->reg = devm_ioremap_resource(&pdev->dev, res);
    if (IS_ERR(flctl->reg))
    return PTR_ERR(flctl->reg);
    + flctl->fifo = res->start + 0x24; /* FLDTFIFO */

    irq = platform_get_irq(pdev, 0);
    if (irq < 0) {
    --- a/include/linux/mtd/sh_flctl.h
    +++ b/include/linux/mtd/sh_flctl.h
    @@ -148,6 +148,7 @@ struct sh_flctl {
    struct platform_device *pdev;
    struct dev_pm_qos_request pm_qos;
    void __iomem *reg;
    + resource_size_t fifo;

    uint8_t done_buff[2048 + 64]; /* max size 2048 + 64 */
    int read_bytes;

    \
     
     \ /
      Last update: 2018-02-23 21:26    [W:4.076 / U:0.576 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site