lkml.org 
[lkml]   [2018]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 3/3] gpio: rcar: Use wakeup_path i.s.o. explicit clock handling
On Mon, Feb 12, 2018 at 2:55 PM, Geert Uytterhoeven
<geert+renesas@glider.be> wrote:

> Since commit ab82fa7da4dce5c7 ("gpio: rcar: Prevent module clock disable
> when wake-up is enabled"), when a GPIO is used for wakeup, the GPIO
> block's module clock (if exists) is manually kept running during system
> suspend, to make sure the device stays active.
>
> However, this explicit clock handling is merely a workaround for a
> failure to properly communicate wakeup information to the device core.
>
> Instead, set the device's power.wakeup_path field, to indicate this
> device is part of the wakeup path. Depending on the PM Domain's
> active_wakeup configuration, the genpd core code will keep the device
> enabled (and the clock running) during system suspend when needed.
> This allows for the removal of all explicit clock handling code from the
> driver.
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Acked-by: Linus Walleij <linus.walleij@linaro.org>

Can I apply this and only this patch to GPIO?

Should it be applied for fixes, next?

Else please funnel this through the irqchip tree with my
ACK.

Yours,
Linus Walleij

\
 
 \ /
  Last update: 2018-02-22 15:23    [W:0.074 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site