lkml.org 
[lkml]   [2018]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH] riscv/locking: Strengthen spin_lock() and spin_unlock()
On Thu, Feb 22, 2018 at 01:19:50PM +0100, Andrea Parri wrote:
> The LKMM defines certain memory ordering constraints for spin_lock(),
> spin_unlock() and other primitives that the kernel developer can rely
> on; unfortunately, some of these constraints are not currently met by
> the RISC-V implementation of spin_lock(), spin_unlock().
>
> The following MP-like program exemplifies the issue: according to our
> LKMM, program "unlock-lock-read-ordering" below can never reach state
> (1:r0=1 /\ 1:r1=0). However, when we map this C program to the RISCV
> program "RISCV-unlock-lock-read-ordering" below following the current
> implementation, the corresponding state is reachable according to the
> RISCV specification and its formalizations [2].
>
> C unlock-lock-read-ordering
>
> {}
> /* s initially owned by P1 */
>
> P0(int *x, int *y)
> {
> WRITE_ONCE(*x, 1);
> smp_wmb();
> WRITE_ONCE(*y, 1);
> }
>
> P1(int *x, int *y, spinlock_t *s)
> {
> int r0;
> int r1;
>
> r0 = READ_ONCE(*y);
> spin_unlock(s);
> spin_lock(s);
> r1 = READ_ONCE(*y);

This last read should have been from 'x' of course (and similarly in
unlock-lock-write-ordering). Sorry,

Andrea


> }
>
> exists (1:r0=1 /\ 1:r1=0)
>
> RISCV RISCV-unlock-lock-read-ordering
> {
> 0:x2=x; 0:x4=y;
> 1:x2=y; 1:x4=x; 1:x6=s;
> s=1;
> }
> P0 | P1 ;
> ori x1,x0,1 | lw x1,0(x2) ;
> sw x1,0(x2) | amoswap.w.rl x0,x0,(x6) ;
> fence w,w | ori x5,x0,1 ;
> ori x3,x0,1 | amoswap.w.aq x0,x5,(x6) ;
> sw x3,0(x4) | lw x3,0(x4) ;
> exists
> (1:x1=1 /\ 1:x3=0)
>
> The issue can in fact be exarcebated if, as envisaged/discussed in [3],
> the LKMM will be modified to become even more "demanding" on the order-
> ing constraints associated to the locking primitives. For example the
> state (1:r0=1 /\ 1:r1=0) in program "unlock-lock-write-ordering" below
> is currently allowed by LKMM (as is the corresponding state in "RISCV-
> unlock-lock-write-ordering" below). However, proposals modifying LKMM
> to _forbid_ that state have already appeared on LKML [4].
>
> C unlock-lock-write-ordering
>
> {}
> /* s initially owned by P0 */
>
> P0(int *x, int *y, spinlock_t *s)
> {
> WRITE_ONCE(*x, 1);
> spin_unlock(s);
> spin_lock(s);
> WRITE_ONCE(*y, 1);
> }
>
> P1(int *x, int *y)
> {
> int r0;
> int r1;
>
> r0 = READ_ONCE(*y);
> smp_rmb();
> r1 = READ_ONCE(*y);
> }
>
> exists (1:r0=1 /\ 1:r1=0)
>
> RISCV RISCV-unlock-lock-write-ordering
> {
> 0:x2=x; 0:x4=y; 0:x6=s;
> 1:x2=y; 1:x4=x;
> s=1;
> }
> P0 | P1 ;
> ori x1,x0,1 | lw x1,0(x2) ;
> sw x1,0(x2) | fence r,r ;
> amoswap.w.rl x0,x0,(x6) | lw x3,0(x4) ;
> ori x5,x0,1 | ;
> amoswap.w.aq x0,x5,(x6) | ;
> ori x3,x0,1 | ;
> sw x3,0(x4) | ;
> exists
> (1:x1=1 /\ 1:x3=0)
>
> [Curiously, RISC-V's current implementations of smp_load_acquire() and
> smp_store_release() provide way stronger ordering than what currently
> required by LKMM since those're relying on the generic implementation
> (c.f, also, [5]). ]
>
> This RFC fixes the issue by strengthening RISC-V's implementations of
> spin_lock() and spin_unlock(), based on "A spinlock with fences" from
> Section 2.3.5 ("Acquire/Release Ordering") of the RISC-V draft spec.
> It does _not_ attempt to fix read-lock and atomics (for which, AFAICT,
> similar considerations would hold).
>
> IMPORTANT. This patch is _NOT_ intended to be applied as is. Rather,
> this is intended to test the waters, implicit questions being "Should
> we take this direction?" "Are changes to LKMM needed?" (and develop a
> technical discussion on the above issues.)
>
> [1] https://marc.info/?l=linux-kernel&m=151633436614259&w=2
> [2] https://groups.google.com/a/groups.riscv.org/forum/#!topic/isa-dev/hKywNHBkAXM
> [3] https://marc.info/?l=linux-kernel&m=151181741400461&w=2
> [4] https://marc.info/?l=linux-kernel&m=151871035014425&w=2
> [5] https://marc.info/?l=linux-kernel&m=151912186913692&w=2
>
> Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
> Cc: Palmer Dabbelt <palmer@sifive.com>
> Cc: Albert Ou <albert@sifive.com>
> Cc: Daniel Lustig <dlustig@nvidia.com>
> Cc: Alan Stern <stern@rowland.harvard.edu>
> Cc: Will Deacon <will.deacon@arm.com>
> Cc: Peter Zijlstra <peterz@infradead.org>
> Cc: Boqun Feng <boqun.feng@gmail.com>
> Cc: Nicholas Piggin <npiggin@gmail.com>
> Cc: David Howells <dhowells@redhat.com>
> Cc: Jade Alglave <j.alglave@ucl.ac.uk>
> Cc: Luc Maranget <luc.maranget@inria.fr>
> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
> Cc: Akira Yokosawa <akiyks@gmail.com>
> Cc: Ingo Molnar <mingo@kernel.org>
> Cc: Linus Torvalds <torvalds@linux-foundation.org>
> Cc: linux-riscv@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> ---
> arch/riscv/include/asm/spinlock.h | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/arch/riscv/include/asm/spinlock.h b/arch/riscv/include/asm/spinlock.h
> index 2fd27e8ef1fd6..2f89fc62c9196 100644
> --- a/arch/riscv/include/asm/spinlock.h
> +++ b/arch/riscv/include/asm/spinlock.h
> @@ -28,8 +28,9 @@
>
> static inline void arch_spin_unlock(arch_spinlock_t *lock)
> {
> + RISCV_FENCE(rw,w);
> __asm__ __volatile__ (
> - "amoswap.w.rl x0, x0, %0"
> + "amoswap.w x0, x0, %0"
> : "=A" (lock->lock)
> :: "memory");
> }
> @@ -39,10 +40,11 @@ static inline int arch_spin_trylock(arch_spinlock_t *lock)
> int tmp = 1, busy;
>
> __asm__ __volatile__ (
> - "amoswap.w.aq %0, %2, %1"
> + "amoswap.w %0, %2, %1"
> : "=r" (busy), "+A" (lock->lock)
> : "r" (tmp)
> : "memory");
> + RISCV_FENCE(r,rw);
>
> return !busy;
> }
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2018-02-22 13:44    [W:2.052 / U:0.720 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site