lkml.org 
[lkml]   [2018]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] PCI: Add quirk for Cavium Thunder-X2 PCIe erratum #173
On Wed, Feb 21, 2018 at 05:20:40PM -0600, Bjorn Helgaas wrote:
> On Wed, Feb 21, 2018 at 04:25:08PM +0530, George Cherian wrote:
> > I have found another configuration where this fails.
> > Following is the configuration
> > 1) Connected a PCIe Intel i40 card under the root port.
> > 2) unbind the i40 driver and bind with vfio-pci driver.
> > 3) Run lspci in a loop. "lspci -s xx:xx.xx -vvv"
> >
> > I get the same synchronous external abort.
> > In this case the vfio-pci driver probe it moves the device (i40) to
> > D3hot provided disable_idle_d3 is not set. lspci tries to do
> > the config_access which fails with synchronous external abort when
> > the root port transitions to D3hot.
>
> It *looks* like rpm_resume() should resume parent devices, i.e., the
> root port, but I don't know that code at all.

It does that unless the ignore_children flag is set, which only few
drivers do.

Sounds to me like another missing pci_config_pm_runtime_get() somewhere
but it's hard to tell without a stacktrace.

Thanks,

Lukas

\
 
 \ /
  Last update: 2018-02-22 09:36    [W:0.160 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site