lkml.org 
[lkml]   [2018]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 04/10] pinctrl: actions: Add Actions S900 pinctrl driver
Hi Philippe,
On Tue, Feb 20, 2018 at 08:53:22AM +0100, Philippe Ombredanne wrote:
> Dear Manivannan,
>
> On Sat, Feb 17, 2018 at 9:44 PM, Manivannan Sadhasivam
> <manivannan.sadhasivam@linaro.org> wrote:
> > Add pinctrl driver for Actions Semi S900 SoC. The driver supports
> > pinctrl, pinmux and pinconf functionalities through a range of registers
> > common to both gpio driver and pinctrl driver.
> >
> > Pinmux functionality is available only for the pin groups while the
> > pinconf functionality is available for both pin groups and individual
> > pins.
> >
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
>
>
> <snip>
>
>
> > --- /dev/null
> > +++ b/drivers/pinctrl/actions/pinctrl-s900.c
> > @@ -0,0 +1,2536 @@
> > +// SPDX-License-Identifier: GPL-2.0+
>
> <snip>
>
> > +MODULE_LICENSE("GPL v2");
>
> This does not match your license above. Per module.h "GPL v2" means
> GPL-2.0 where you license above GPL-2.0+ means or later
>
Should be MODULE_LICENSE("GPL"). Will get it fixed in next revision.

Thanks,
Mani
> --
> Cordially
> Philippe Ombredanne

\
 
 \ /
  Last update: 2018-02-21 15:57    [W:0.104 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site