lkml.org 
[lkml]   [2018]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.14 102/167] Revert "mmc: meson-gx: include tx phase in the tuning process"
Date
4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jerome Brunet <jbrunet@baylibre.com>

commit fe0e58048f005fdce315eb4d185e5c160be4ac01 upstream.

This reverts commit 0a44697627d17a66d7dc98f17aeca07ca79c5c20.

This commit was initially intended to fix problems with hs200 and hs400
on some boards, mainly the odroid-c2. The OC2 (Rev 0.2) I have performs
well in this modes, so I could not confirm these issues.

We've had several reports about the issues being still present on (some)
OC2, so apparently, this change does not do what it was supposed to do.
Maybe the eMMC signal quality is on the edge on the board. This may
explain the variability we see in term of stability, but this is just a
guess. Lowering the max_frequency to 100Mhz seems to do trick for those
affected by the issue

Worse, the commit created new issues (CRC errors and hangs) on other
boards, such as the kvim 1 and 2, the p200 or the libretech-cc.

According to amlogic, the Tx phase should not be tuned and left in its
default configuration, so it is best to just revert the commit.

Fixes: 0a44697627d1 ("mmc: meson-gx: include tx phase in the tuning process")
Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/mmc/host/meson-gx-mmc.c | 19 +------------------
1 file changed, 1 insertion(+), 18 deletions(-)

--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -716,22 +716,6 @@ static int meson_mmc_clk_phase_tuning(st
static int meson_mmc_execute_tuning(struct mmc_host *mmc, u32 opcode)
{
struct meson_host *host = mmc_priv(mmc);
- int ret;
-
- /*
- * If this is the initial tuning, try to get a sane Rx starting
- * phase before doing the actual tuning.
- */
- if (!mmc->doing_retune) {
- ret = meson_mmc_clk_phase_tuning(mmc, opcode, host->rx_clk);
-
- if (ret)
- return ret;
- }
-
- ret = meson_mmc_clk_phase_tuning(mmc, opcode, host->tx_clk);
- if (ret)
- return ret;

return meson_mmc_clk_phase_tuning(mmc, opcode, host->rx_clk);
}
@@ -762,9 +746,8 @@ static void meson_mmc_set_ios(struct mmc
if (!IS_ERR(mmc->supply.vmmc))
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);

- /* Reset phases */
+ /* Reset rx phase */
clk_set_phase(host->rx_clk, 0);
- clk_set_phase(host->tx_clk, 270);

break;


\
 
 \ /
  Last update: 2018-02-21 15:07    [W:0.344 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site