lkml.org 
[lkml]   [2018]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] mmc: dw_mmc: Fix the DTO timeout overflow calculation for 32-bit systems
On Wed, Feb 21, 2018 at 7:57 PM, Evgeniy Didin
<Evgeniy.Didin@synopsys.com> wrote:
> In commit 9d9491a7da2a ("mmc: dw_mmc: Fix the DTO timeout calculation") have been made
> changes which can cause multiply overflow for 32-bit systems. It was caught on arc/hsdk board
> when "drto_ms" should be 671, but it was 70 and that caused a flow of stack-traces just copying
> file from mmc.
>
> Lets cast this multiply to long long int which prevents overflow.
>
> Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
> CC: Alexey Brodkin <abrodkin@synopsys.com>
> CC: Douglas Anderson <dianders@chromium.org>
> CC: Ulf Hansson <ulf.hansson@linaro.org>
> CC: linux-kernel@vger.kernel.org
> CC: linux-snps-arc@lists.infradead.org

> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -1944,7 +1944,7 @@ static void dw_mci_set_drto(struct dw_mci *host)
> drto_div = (mci_readl(host, CLKDIV) & 0xff) * 2;
> if (drto_div == 0)
> drto_div = 1;
> - drto_ms = DIV_ROUND_UP(MSEC_PER_SEC * drto_clks * drto_div,
> + drto_ms = DIV_ROUND_UP((uint64_t)MSEC_PER_SEC * drto_clks * drto_div,
> host->bus_hz);

Does the driver use uint64_t elsewhere?
Or simple u64?

--
With Best Regards,
Andy Shevchenko

\
 
 \ /
  Last update: 2018-02-21 20:17    [W:0.042 / U:0.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site