lkml.org 
[lkml]   [2018]   [Feb]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] xhci: Fix front USB ports on ASUS PRIME B350M-A
From
Date


> On 20 Feb 2018, at 4:24 PM, Mathias Nyman <mathias.nyman@linux.intel.com> wrote:
>
> Hi
>
> On 19.02.2018 21:06, Kai-Heng Feng wrote:
>> When a USB device gets plugged on ASUS PRIME B350M-A's front ports, the
>> xHC stops working:
>> [ 549.114587] xhci_hcd 0000:02:00.0: WARN: xHC CMD_RUN timeout
>> [ 549.114608] suspend_common(): xhci_pci_suspend+0x0/0xc0 returns -110
>> [ 549.114638] xhci_hcd 0000:02:00.0: can't suspend (hcd_pci_runtime_suspend returned -110)
>
> Is the xhci runtime suspend something that you expected here?
> I mean was the plugged device first enumerated normally, driver bound, inactive and runtime suspended
> first?

I guess this is how it behaves, here’s the log after a device gets plugged:

[ 7535.716578] xhci_hcd 0000:02:00.0: // Setting command ring address to 0xff86c001
[ 7535.720107] xhci_hcd 0000:02:00.0: xhci_resume: starting port polling.
[ 7535.720114] xhci_hcd 0000:02:00.0: xhci_hub_status_data: stopping port polling.
[ 7535.720134] xhci_hcd 0000:02:00.0: xhci_suspend: stopping port polling.
[ 7535.720190] xhci_hcd 0000:02:00.0: Port Status Change Event for port 8
[ 7535.720194] xhci_hcd 0000:02:00.0: resume root hub
[ 7535.720201] xhci_hcd 0000:02:00.0: handle_port_status: starting port polling.
[ 7535.721675] xhci_hcd 0000:02:00.0: // Setting command ring address to 0xff86c001
[ 7535.722106] xhci_hcd 0000:02:00.0: // Setting command ring address to 0xff86c001
[ 7535.725538] xhci_hcd 0000:02:00.0: xhci_resume: starting port polling.

So the xHC resumes and suspends, then resume again.

[ 7535.725543] xhci_hcd 0000:02:00.0: xhci_hub_status_data: stopping port polling.
[ 7535.725587] xhci_hcd 0000:02:00.0: get port status, actual port 0 status = 0x2a0
[ 7535.725590] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 7535.725606] xhci_hcd 0000:02:00.0: get port status, actual port 1 status = 0x2a0
[ 7535.725608] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 7535.725616] xhci_hcd 0000:02:00.0: get port status, actual port 2 status = 0x2a0
[ 7535.725618] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 7535.725625] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x202e1
[ 7535.725627] xhci_hcd 0000:02:00.0: Get port status returned 0x10101
[ 7535.725632] xhci_hcd 0000:02:00.0: Port Status Change Event for port 8
[ 7535.725636] xhci_hcd 0000:02:00.0: handle_port_status: starting port polling.
[ 7535.725656] xhci_hcd 0000:02:00.0: clear port connect change, actual port 3 status = 0x2e1
[ 7535.725663] xhci_hcd 0000:02:00.0: get port status, actual port 4 status = 0x2a0
[ 7535.725665] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 7535.725672] xhci_hcd 0000:02:00.0: get port status, actual port 5 status = 0x2a0
[ 7535.725674] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 7535.725680] xhci_hcd 0000:02:00.0: get port status, actual port 6 status = 0x2a0
[ 7535.725682] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 7535.725689] xhci_hcd 0000:02:00.0: get port status, actual port 7 status = 0x2a0
[ 7535.725691] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 7535.725698] xhci_hcd 0000:02:00.0: get port status, actual port 8 status = 0x2a0
[ 7535.725699] xhci_hcd 0000:02:00.0: Get port status returned 0x100
[ 7535.725706] xhci_hcd 0000:02:00.0: get port status, actual port 9 status = 0x2a0
[ 7535.725708] xhci_hcd 0000:02:00.0: Get port status returned 0x100

[ 7535.736165] xhci_hcd 0000:04:00.0: // Setting command ring address to 0xfff58001
[ 7535.740033] xhci_hcd 0000:04:00.0: xhci_resume: starting port polling.
[ 7535.740040] xhci_hcd 0000:04:00.0: xhci_hub_status_data: stopping port polling.
[ 7535.740047] xhci_hcd 0000:04:00.0: xhci_hub_status_data: stopping port polling.
[ 7535.740133] xhci_hcd 0000:04:00.0: xhci_suspend: stopping port polling.
[ 7535.740161] xhci_hcd 0000:04:00.0: // Setting command ring address to 0xfff58001

This is the “other” xHC that I mentioned in patch v1. It provides USB 3.1 capabilities to front USB port.

[ 7535.776003] xhci_hcd 0000:02:00.0: xhci_hub_status_data: stopping port polling.
[ 7535.832028] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x2e1
[ 7535.832031] xhci_hcd 0000:02:00.0: Get port status returned 0x101
[ 7535.832051] xhci_hcd 0000:02:00.0: // Ding dong!
[ 7535.832150] xhci_hcd 0000:02:00.0: Slot 3 output ctx = 0xff125000 (dma)
[ 7535.832153] xhci_hcd 0000:02:00.0: Slot 3 input ctx = 0xff16c000 (dma)
[ 7535.832160] xhci_hcd 0000:02:00.0: Set slot id 3 dcbaa entry 000000000bd2158a to 0xff125000
[ 7535.832189] xhci_hcd 0000:02:00.0: set port reset, actual port 3 status = 0x2e1
[ 7535.835982] xhci_hcd 0000:02:00.0: xhci_hub_status_data: stopping port polling.
[ 7535.892049] xhci_hcd 0000:02:00.0: Port Status Change Event for port 8
[ 7535.892056] xhci_hcd 0000:02:00.0: handle_port_status: starting port polling.
[ 7535.900058] xhci_hcd 0000:02:00.0: get port status, actual port 3 status = 0x200e03
[ 7535.900061] xhci_hcd 0000:02:00.0: Get port status returned 0x100503
[ 7535.900079] xhci_hcd 0000:02:00.0: clear port reset change, actual port 3 status = 0xe03
[ 7535.959990] usb 1-4: new high-speed USB device number 4 using xhci_hcd

>
>> Delay before running xHC command CMD_RUN can workaround the issue.
>> Use a new quirk to make the delay only targets to the affected xHC.
>
> Is this some known issue with this chip, or something figured out by trial and error?

By trial and error.
This might be a more pervasive issue, but I don’t see other bug reports though.

>
>> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
>
> Thanks, otherwise workaround seems fine, just curious about the two details above

Thank you.

Kai-Heng

>
> -Mathias
>

\
 
 \ /
  Last update: 2018-02-20 12:14    [W:0.423 / U:0.384 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site