lkml.org 
[lkml]   [2018]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 05/15] ARM64: dts: Add R-Car Salvator-x M3-N support
On Wed, Feb 14, 2018 at 02:58:34PM +0100, Geert Uytterhoeven wrote:
> Hi Jacopo,
>
> On Tue, Feb 13, 2018 at 10:45 AM, Jacopo Mondi
> <jacopo+renesas@jmondi.org> wrote:
> > Add initial support for R-Car M3-N Salvator-x and r8a77965 SoC in
> > device tree with cpg-mssr, reset and clock nodes.
> >
> > Add place-holder device nodes for all nodes referred by
> > "salvator-common.dtsi"
> >
> > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
>
> Thanks for your patch!
>
> Looks mostly fine to me.
>
> P.S. scripts/dtc/dtx_diff arch/arm64/boot/dts/renesas/r8a7796{,5}-salvator-x.dtb
> is your friend.
>
> > arch/arm64/Kconfig.platforms | 6 +
> > arch/arm64/boot/dts/renesas/Makefile | 1 +
> > .../arm64/boot/dts/renesas/r8a77965-salvator-x.dts | 30 ++
> > arch/arm64/boot/dts/renesas/r8a77965.dtsi | 495 +++++++++++++++++++++
> > 4 files changed, 532 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts
> > create mode 100644 arch/arm64/boot/dts/renesas/r8a77965.dtsi
>
> The maintainer will probably ask you to split this in three parts:
> - ARCH_R8A77965
> - r8a77965.dtsi
> - r8a77965-salvator-x.dts

Yes, I would like to ask for that.

> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts
> > @@ -0,0 +1,30 @@
> > +// SPDX-License-Identifier: GPL-2.
> > +/*
> > + * Device Tree Source for the Salvator-X board
>
> with R-Car M3-N
>
> > + *
> > + * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org>
> > + */
> > +
> > +/dts-v1/;
> > +#include "r8a77965.dtsi"
> > +#include "salvator-x.dtsi"
> > +
> > +/ {
> > + model = "Renesas Salvator-X board based on r8a77965";
> > + compatible = "renesas,salvator-x", "renesas,r8a77965";
> > +
> > + aliases {
> > + serial0 = &scif2;
> > + };
> > +
> > + chosen {
> > + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
> > + stdout-path = "serial0:115200n8";
> > + };
>
> Both aliases and chosen are already defined in salvator-common.dtsi,
> included via salvator-x.dtsi.
>
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
> > @@ -0,0 +1,495 @@
> > +// SPDX-License-Identifier: GPL-2.
> > +/*
> > + * Device Tree Source for the r8a77965 SoC
> > + *
> > + * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org>
> > + *
> > + * Based on r8a7796.dtsi
> > + * Copyright (C) 2016 Renesas Electronics Corp.
> > + */
> > +
> > +#include <dt-bindings/clock/r8a77965-cpg-mssr.h>
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > +#include <dt-bindings/power/r8a77965-sysc.h>
> > +
> > +#define CPG_AUDIO_CLK_I R8A77965_CLK_S0D4
> > +
> > +/ {
>
> > + soc {
> > + compatible = "simple-bus";
> > + interrupt-parent = <&gic>;
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + ranges;
>
> > + timer {
> > + compatible = "arm,armv8-timer";
> > + interrupts = <GIC_PPI 13
> > + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
> > + <GIC_PPI 14
> > + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
> > + <GIC_PPI 11
> > + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
> > + <GIC_PPI 10
> > + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
> > + };
>
> Please move the timer out of the soc node, as it does't have a unit address
> and a reg property.
>
> > + pmu_a57 {
> > + compatible = "arm,cortex-a57-pmu";
> > + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-affinity = <&a57_0>,
> > + <&a57_1>;
> > + };
>
> Please move the pmu out of the soc node, as it does't have a unit address
> and a reg property.

Please refer to one of the upstream Gen3 dtsi files for examples of the
above.

\
 
 \ /
  Last update: 2018-02-15 18:04    [W:0.090 / U:0.724 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site