Messages in this thread | | | Subject | Re: [PATCH v3 0/9] irqchip: stm32: add stm32h7 support | From | Alexandre Torgue <> | Date | Wed, 14 Feb 2018 16:38:15 +0100 |
| |
Hi
On 11/06/2017 06:03 PM, Ludovic Barre wrote: > From: Ludovic Barre <ludovic.barre@st.com> > > This series adds: > -Management of multi-bank of external interrupts > stm32h7 has up to 96 inputs (3 banks of 32 inputs). > -Fix initial value after cold/hot boot (wakeup issue). > > Changes v3: > -remove chip.name and handler, already done by > irq_alloc_domain_generic_chips > -add Rob ack in dt-bindings commit > > Changes v2: > -Remove irq_mask and adds const on struct stm32_exti_bank > -Add wrapper functions pending and ack > -Replace BITS_PER_LONG by IRQS_PER_BANK > -Fill commit message on > "ARM: dts: stm32: add support of exti on stm32h743" > -Add system config bank for stm32h7 > > Ludovic Barre (9): > irqchip: stm32: select GENERIC_IRQ_CHIP > irqchip: stm32: add multi-bank management > dt-bindings: interrupt-controllers: add compatible string for stm32h7 > irqchip: stm32: add stm32h7 support > irqchip: stm32: fix initial values > irqchip: stm32: move the wakeup on interrupt mask > ARM: dts: stm32: add exti support for stm32h743 > ARM: dts: stm32: add system config bank node for stm32h743 > ARM: dts: stm32: add support of exti on stm32h743 pinctrl
patches 7/8/9 (DT part) applied on stm32-next.
Thanks Alex
> > .../interrupt-controller/st,stm32-exti.txt | 4 +- > arch/arm/boot/dts/stm32h743-pinctrl.dtsi | 24 +++ > arch/arm/boot/dts/stm32h743.dtsi | 13 ++ > drivers/irqchip/Kconfig | 1 + > drivers/irqchip/irq-stm32-exti.c | 206 ++++++++++++++++----- > 5 files changed, 198 insertions(+), 50 deletions(-) >
| |