lkml.org 
[lkml]   [2018]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/2] net: phy: dp83867: Add binding for the CLK_OUT pin muxing option
Date
From: Wadim Egorov <w.egorov@phytec.de>

The DP83867 has a muxing option for the CLK_OUT pin. It is possible
to set CLK_OUT for different channels.
Create a binding to select a specific clock for CLK_OUT pin.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
---
Changes:
Added check if clk_output_sel has a valid value
Only write the clock ouput register if a musing is desired

drivers/net/phy/dp83867.c | 19 +++++++++++++++++++
include/dt-bindings/net/ti-dp83867.h | 14 ++++++++++++++
2 files changed, 33 insertions(+)

diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index c1ab976..a862194 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -75,6 +75,8 @@

#define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX 0x0
#define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN 0x1f
+#define DP83867_IO_MUX_CFG_CLK_O_SEL_MASK (0x1f << 8)
+#define DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT 8

/* CFG4 bits */
#define DP83867_CFG4_PORT_MIRROR_EN BIT(0)
@@ -92,6 +94,7 @@ struct dp83867_private {
int io_impedance;
int port_mirroring;
bool rxctrl_strap_quirk;
+ int clk_output_sel;
};

static int dp83867_ack_interrupt(struct phy_device *phydev)
@@ -160,6 +163,14 @@ static int dp83867_of_init(struct phy_device *phydev)
dp83867->io_impedance = -EINVAL;

/* Optional configuration */
+ ret = of_property_read_u32(of_node, "ti,clk-output-sel",
+ &dp83867->clk_output_sel);
+ if (ret || dp83867->clk_output_sel > DP83867_CLK_O_SEL_REF_CLK)
+ /* Keep the default value if ti,clk-output-sel is not set
+ * or too high
+ */
+ dp83867->clk_output_sel = DP83867_CLK_O_SEL_REF_CLK;
+
if (of_property_read_bool(of_node, "ti,max-output-impedance"))
dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX;
else if (of_property_read_bool(of_node, "ti,min-output-impedance"))
@@ -295,6 +306,14 @@ static int dp83867_config_init(struct phy_device *phydev)
if (dp83867->port_mirroring != DP83867_PORT_MIRROING_KEEP)
dp83867_config_port_mirroring(phydev);

+ /* Clock output selection if muxing property is set */
+ if (dp83867->clk_output_sel != DP83867_CLK_O_SEL_REF_CLK) {
+ val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_IO_MUX_CFG);
+ val &= ~DP83867_IO_MUX_CFG_CLK_O_SEL_MASK;
+ val |= (dp83867->clk_output_sel << DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT);
+ phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_IO_MUX_CFG, val);
+ }
+
return 0;
}

diff --git a/include/dt-bindings/net/ti-dp83867.h b/include/dt-bindings/net/ti-dp83867.h
index 172744a..7b16564 100644
--- a/include/dt-bindings/net/ti-dp83867.h
+++ b/include/dt-bindings/net/ti-dp83867.h
@@ -42,4 +42,18 @@
#define DP83867_RGMIIDCTL_3_75_NS 0xe
#define DP83867_RGMIIDCTL_4_00_NS 0xf

+/* IO_MUX_CFG - Clock output selection */
+#define DP83867_CLK_O_SEL_CHN_A_RCLK 0x0
+#define DP83867_CLK_O_SEL_CHN_B_RCLK 0x1
+#define DP83867_CLK_O_SEL_CHN_C_RCLK 0x2
+#define DP83867_CLK_O_SEL_CHN_D_RCLK 0x3
+#define DP83867_CLK_O_SEL_CHN_A_RCLK_DIV5 0x4
+#define DP83867_CLK_O_SEL_CHN_B_RCLK_DIV5 0x5
+#define DP83867_CLK_O_SEL_CHN_C_RCLK_DIV5 0x6
+#define DP83867_CLK_O_SEL_CHN_D_RCLK_DIV5 0x7
+#define DP83867_CLK_O_SEL_CHN_A_TCLK 0x8
+#define DP83867_CLK_O_SEL_CHN_B_TCLK 0x9
+#define DP83867_CLK_O_SEL_CHN_C_TCLK 0xA
+#define DP83867_CLK_O_SEL_CHN_D_TCLK 0xB
+#define DP83867_CLK_O_SEL_REF_CLK 0xC
#endif
--
2.7.4
\
 
 \ /
  Last update: 2018-02-14 13:24    [W:0.040 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site