lkml.org 
[lkml]   [2018]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 00/17] Add kexec_file_load support to s390
Hi Dave,

I just browsed AKASHI's patches (v7). The way I see it the common code changes
are on different areas of kexec_file and shouldn't get in conflict. Only in the
arch code (s390 and arm64) some function calls might need an update. But I have
to take a closer look on the patches first.

@AKASHI: Welcome to the list. While browsing I couldn't find any
arch_apply_relocation function for arm64. These require the biggest changes in
my patch set. Did I just miss it or does arm64 work differently?

@Dave: Happy holiday

Thanks
Philipp

On Wed, 14 Feb 2018 15:35:43 +0800
Dave Young <dyoung@redhat.com> wrote:

> Hi Philipp,
>
> I added AKASHI in cc, he posted arm64 kexec_file series previously.
> I would like to read both series especially the general part, but
> maybe at the end of this month because of a holiday..
>
> From the patch log the cleanup looks nice, but still need read the
> details.
>
> On 02/12/18 at 11:07am, Philipp Rudo wrote:
> > Hi everybody
> >
> > resending the series as there was no reaction, yet. Furthermore i was told
> > that Andrew and the x86 list should also be CCed, so welcome.
> >
> > No changes made to the patches since first time i sent them. The patches
> > apply to the current master (v4.16-rc1).
> >
> > Thanks
> > Philipp
> >
> > ---
> >
> > this series adds the kexec_file_load system call to s390. Before the system
> > call is added there are some preparations/clean ups to common
> > kexec_file_load. In detail this series contains:
> >
> > Patch #1&2: Minor cleanups/fixes.
> >
> > Patch #3-9: Clean up the purgatory load/relocation code. Especially remove
> > the mis-use of the purgatory_info->sechdrs->sh_offset field, currently
> > holding a pointer into either kexec_purgatory (ro) or purgatory_buf (rw)
> > depending on the section. With these patches the section address will be
> > calculated verbosely and sh_offset will contain the offset of the section
> > in the stripped purgatory binary (purgatory_buf).
> >
> > Patch #10: Allows architectures to set the purgaory load address. This
> > patch is important for s390 as the kernel and purgatory have to be loaded
> > to fixed addresses. In current code this is impossible as the purgatory
> > load is opaque to the architecture.
> >
> > Patch #11: Moves x86 purgatories sha implementation to common lib/
> > directory.
> >
> > Patches #12-17 finally adds the kexec_file_load system call to s390.
> >
> > Please note that I had to touch arch code for x86 and power a little. In
> > theory this should not change the behavior but I don't have a way to test
> > it. Cross-compiling with defconfig(*) works fine for both.
> >
> > Thanks
> > Philipp
> >
> > (*) On x86 with the orc unwinder turned off. objtool SEGFAULTs on s390...
> >
> > Philipp Rudo (17):
> > kexec_file: Silence compile warnings
> > kexec_file: Remove checks in kexec_purgatory_load
> > kexec_file: Make purgatory_info->ehdr const
> > kexec_file: Search symbols in read-only kexec_purgatory
> > kexec_file: Use read-only sections in arch_kexec_apply_relocations*
> > kexec_file: Split up __kexec_load_puragory
> > kexec_file: Simplify kexec_purgatory_setup_sechdrs 1
> > kexec_file: Simplify kexec_purgatory_setup_sechdrs 2
> > kexec_file: Remove mis-use of sh_offset field
> > kexec_file: Allow archs to set purgatory load address
> > kexec_file: Move purgatories sha256 to common code
> > s390/kexec_file: Prepare setup.h for kexec_file_load
> > s390/kexec_file: Add purgatory
> > s390/kexec_file: Add kexec_file_load system call
> > s390/kexec_file: Add image loader
> > s390/kexec_file: Add crash support to image loader
> > s390/kexec_file: Add ELF loader
> >
> > arch/powerpc/kernel/kexec_elf_64.c | 9 +-
> > arch/s390/Kbuild | 1 +
> > arch/s390/Kconfig | 4 +
> > arch/s390/include/asm/kexec.h | 23 ++
> > arch/s390/include/asm/purgatory.h | 17 ++
> > arch/s390/include/asm/setup.h | 40 ++-
> > arch/s390/kernel/Makefile | 1 +
> > arch/s390/kernel/asm-offsets.c | 5 +
> > arch/s390/kernel/compat_wrapper.c | 1 +
> > arch/s390/kernel/kexec_elf.c | 149 ++++++++++
> > arch/s390/kernel/kexec_image.c | 78 +++++
> > arch/s390/kernel/machine_kexec_file.c | 291 +++++++++++++++++++
> > arch/s390/kernel/syscalls/syscall.tbl | 1 +
> > arch/s390/purgatory/Makefile | 37 +++
> > arch/s390/purgatory/head.S | 279 ++++++++++++++++++
> > arch/s390/purgatory/purgatory.c | 42 +++
> > arch/x86/kernel/kexec-bzimage64.c | 8 +-
> > arch/x86/kernel/machine_kexec_64.c | 66 ++---
> > arch/x86/purgatory/Makefile | 3 +
> > arch/x86/purgatory/purgatory.c | 2 +-
> > include/linux/kexec.h | 38 +--
> > {arch/x86/purgatory => include/linux}/sha256.h | 10 +-
> > kernel/kexec_file.c | 375 ++++++++++++-------------
> > {arch/x86/purgatory => lib}/sha256.c | 4 +-
> > 24 files changed, 1200 insertions(+), 284 deletions(-)
> > create mode 100644 arch/s390/include/asm/purgatory.h
> > create mode 100644 arch/s390/kernel/kexec_elf.c
> > create mode 100644 arch/s390/kernel/kexec_image.c
> > create mode 100644 arch/s390/kernel/machine_kexec_file.c
> > create mode 100644 arch/s390/purgatory/Makefile
> > create mode 100644 arch/s390/purgatory/head.S
> > create mode 100644 arch/s390/purgatory/purgatory.c
> > rename {arch/x86/purgatory => include/linux}/sha256.h (63%)
> > rename {arch/x86/purgatory => lib}/sha256.c (99%)
> >
> > --
> > 2.13.5
> >
> >
> > _______________________________________________
> > kexec mailing list
> > kexec@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/kexec
>
> Thanks
> Dave
>

\
 
 \ /
  Last update: 2018-02-14 10:58    [W:0.126 / U:0.620 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site