lkml.org 
[lkml]   [2018]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v3 01/25] dt-bindings: soc: qcom: Add bindings for APR bus
On Tue, Feb 13, 2018 at 04:58:13PM +0000, srinivas.kandagatla@linaro.org wrote:
> From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
>
> This patch add dt bindings for Qualcomm APR (Asynchronous Packet Router)
> bus driver. This bus is used for communicating with DSP which provides
> audio and various other services to cpu.
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
> .../devicetree/bindings/soc/qcom/qcom,apr.txt | 83 ++++++++++++++++++++++
> 1 file changed, 83 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
>
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
> new file mode 100644
> index 000000000000..1b95fbfed348
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
> @@ -0,0 +1,83 @@
> +Qualcomm APR (Asynchronous Packet Router) binding
> +
> +This binding describes the Qualcomm APR. APR is a IPC protocol for
> +communication between Application processor and QDSP. APR is mainly
> +used for audio/voice services on the QDSP.
> +
> +- compatible:
> + Usage: required
> + Value type: <stringlist>
> + Definition: must be "qcom,apr-v<VERSION-NUMBER>", example "qcom,apr-v2"
> +
> +- qcom,apr-dest-domain-id
> + Usage: required
> + Value type: <prop-encoded-array>
> + Definition: Destination processor ID.
> + Possible values are :
> + 1 - APR simulator
> + 2 - PC
> + 3 - MODEM
> + 4 - ADSP
> + 5 - APPS
> + 6 - MODEM2
> + 7 - APPS2
> +
> += APR SERVICES
> +Each subnode of the APR node can represent service tied to this apr. The name
> +of the nodes are not important. The properties of these nodes are defined
> +by the individual bindings for the specific service
> +- but must contain the following property:
> +
> +- qcom,apr-svc-id
> + Usage: required
> + Value type: <prop-encoded-array>
> + Definition: APR Service ID, used for matching the service.
> + Possible values are :
> + 3 - DSP Core Service
> + 4 - Audio Front End Service.
> + 5 - Voice Stream Manager Service.
> + 6 - Voice processing manager.
> + 7 - Audio Stream Manager Service.
> + 8 - Audio Device Manager Service.
> + 9 - Multimode voice manager.
> + 10 - Core voice stream.
> + 11 - Core voice processor.
> + 12 - Ultrasound stream manager.
> + 13 - Listen stream manager.
> +
> +- qcom,apr-svc-name
> + Usage: required
> + Value type: <stringlist>
> + Definition: User readable name of a APR service.
> +
> += APR DEVICES:
> +Each subnode of the APR node can represent devices tied to this apr, like
> +sound-card. The properties of these nodes are defined by the individual
> +bindings for the specific device.
It's not a good design generally to mix different types of nodes at one
level.

> +
> += EXAMPLE
> +The following example represents a QDSP based sound card on a MSM8996 device
> +which uses apr as communication between Apps and QDSP.
> +
> + apr {
> + compatible = "qcom,apr-v2";
> + qcom,smd-channels = "apr_audio_svc";
> + qcom,apr-dest-domain-id = <APR_DOMAIN_ADSP>;
> +
> + q6core {
> + compatible = "qcom,q6core";
> + qcom,apr-svc-name = "CORE";
> + qcom,apr-svc-id = <APR_SVC_ADSP_CORE>;
> + };
> +
> + q6afe {
> + compatible = "qcom,q6afe";
> + qcom,apr-svc-name = "AFE";
> + qcom,apr-svc-id = <APR_SVC_AFE>;
> + };
> +
> + audio {
> + compatible = "qcom,msm8996-snd-card";
> + ...
> + };
> + };
> --
> 2.15.1
>

\
 
 \ /
  Last update: 2018-02-14 00:12    [W:0.320 / U:0.884 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site