lkml.org 
[lkml]   [2018]   [Feb]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 06/45] rtc: ds1305: call rtc_nvmem_register()
Date
Call rtc_nvmem_register instead of letting the core do it and stop using
the nvmem_config member of struct rtc_device.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/rtc/rtc-ds1305.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/rtc/rtc-ds1305.c b/drivers/rtc/rtc-ds1305.c
index d8df2e9e14ad..affa90da26f1 100644
--- a/drivers/rtc/rtc-ds1305.c
+++ b/drivers/rtc/rtc-ds1305.c
@@ -703,15 +703,15 @@ static int ds1305_probe(struct spi_device *spi)
ds1305->rtc->ops = &ds1305_ops;

ds1305_nvmem_cfg.priv = ds1305;
- ds1305->rtc->nvmem_config = &ds1305_nvmem_cfg;
ds1305->rtc->nvram_old_abi = true;
-
status = rtc_register_device(ds1305->rtc);
if (status) {
dev_dbg(&spi->dev, "register rtc --> %d\n", status);
return status;
}

+ rtc_nvmem_register(ds1305->rtc, &ds1305_nvmem_cfg);
+
/* Maybe set up alarm IRQ; be ready to handle it triggering right
* away. NOTE that we don't share this. The signal is active low,
* and we can't ack it before a SPI message delay. We temporarily
--
2.16.1
\
 
 \ /
  Last update: 2018-02-12 23:58    [W:0.110 / U:0.996 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site