lkml.org 
[lkml]   [2018]   [Feb]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 2/3] Revert "extcon: axp288: Redo charger type detection a couple of seconds after probe()"
Date
Redoing the charger type detection to give the usb-role-switch code time
to properly set the role-switch is no good for mainline, since the
usb-role-switch code is not yet in mainline (my bad, sorry).

Also once we've that code there are better ways to fix this which are
not prone to racing as doing a retry after 2 seconds is.

This reverts commit 50082c17bb1455acacd376ae30dff92f2e1addbd.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/extcon/extcon-axp288.c | 32 ++------------------------------
1 file changed, 2 insertions(+), 30 deletions(-)

diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c
index c8f7b6435679..3ec4c715e240 100644
--- a/drivers/extcon/extcon-axp288.c
+++ b/drivers/extcon/extcon-axp288.c
@@ -1,7 +1,6 @@
/*
* extcon-axp288.c - X-Power AXP288 PMIC extcon cable detection driver
*
- * Copyright (C) 2016-2017 Hans de Goede <hdegoede@redhat.com>
* Copyright (C) 2015 Intel Corporation
* Author: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
*
@@ -98,11 +97,9 @@ struct axp288_extcon_info {
struct device *dev;
struct regmap *regmap;
struct regmap_irq_chip_data *regmap_irqc;
- struct delayed_work det_work;
int irq[EXTCON_IRQ_END];
struct extcon_dev *edev;
unsigned int previous_cable;
- bool first_detect_done;
};

/* Power up/down reason string array */
@@ -140,25 +137,6 @@ static void axp288_extcon_log_rsi(struct axp288_extcon_info *info)
regmap_write(info->regmap, AXP288_PS_BOOT_REASON_REG, clear_mask);
}

-static void axp288_chrg_detect_complete(struct axp288_extcon_info *info)
-{
- /*
- * We depend on other drivers to do things like mux the data lines,
- * enable/disable vbus based on the id-pin, etc. Sometimes the BIOS has
- * not set these things up correctly resulting in the initial charger
- * cable type detection giving a wrong result and we end up not charging
- * or charging at only 0.5A.
- *
- * So we schedule a second cable type detection after 2 seconds to
- * give the other drivers time to load and do their thing.
- */
- if (!info->first_detect_done) {
- queue_delayed_work(system_wq, &info->det_work,
- msecs_to_jiffies(2000));
- info->first_detect_done = true;
- }
-}
-
static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
{
int ret, stat, cfg, pwr_stat;
@@ -223,8 +201,6 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
info->previous_cable = cable;
}

- axp288_chrg_detect_complete(info);
-
return 0;

dev_det_ret:
@@ -246,11 +222,8 @@ static irqreturn_t axp288_extcon_isr(int irq, void *data)
return IRQ_HANDLED;
}

-static void axp288_extcon_det_work(struct work_struct *work)
+static void axp288_extcon_enable(struct axp288_extcon_info *info)
{
- struct axp288_extcon_info *info =
- container_of(work, struct axp288_extcon_info, det_work.work);
-
regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG,
BC_GLOBAL_RUN, 0);
/* Enable the charger detection logic */
@@ -272,7 +245,6 @@ static int axp288_extcon_probe(struct platform_device *pdev)
info->regmap = axp20x->regmap;
info->regmap_irqc = axp20x->regmap_irqc;
info->previous_cable = EXTCON_NONE;
- INIT_DELAYED_WORK(&info->det_work, axp288_extcon_det_work);

platform_set_drvdata(pdev, info);

@@ -318,7 +290,7 @@ static int axp288_extcon_probe(struct platform_device *pdev)
}

/* Start charger cable type detection */
- queue_delayed_work(system_wq, &info->det_work, 0);
+ axp288_extcon_enable(info);

return 0;
}
--
2.14.3
\
 
 \ /
  Last update: 2018-02-12 20:47    [W:0.086 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site