lkml.org 
[lkml]   [2018]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/5] spi: stm32: add description about STM32F4 bindings
Date
From: Cezary Gapinski <cezary.gapinski@gmail.com>

Add description that STM32F4 can be used in compatible property.
Master Inter-Data Idleness optional property cannot be used in STM32F4.

Signed-off-by: Cezary Gapinski <cezary.gapinski@gmail.com>
---
Documentation/devicetree/bindings/spi/spi-stm32.txt | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/spi/spi-stm32.txt b/Documentation/devicetree/bindings/spi/spi-stm32.txt
index 1b3fa2c1..d82755c 100644
--- a/Documentation/devicetree/bindings/spi/spi-stm32.txt
+++ b/Documentation/devicetree/bindings/spi/spi-stm32.txt
@@ -7,7 +7,9 @@ from 4 to 32-bit data size. Although it can be configured as master or slave,
only master is supported by the driver.

Required properties:
-- compatible: Must be "st,stm32h7-spi".
+- compatible: Should be one of:
+ "st,stm32h7-spi"
+ "st,stm32f4-spi"
- reg: Offset and length of the device's register set.
- interrupts: Must contain the interrupt id.
- clocks: Must contain an entry for spiclk (which feeds the internal clock
@@ -30,8 +32,9 @@ Child nodes represent devices on the SPI bus
See ../spi/spi-bus.txt

Optional properties:
-- st,spi-midi-ns: (Master Inter-Data Idleness) minimum time delay in
- nanoseconds inserted between two consecutive data frames.
+- st,spi-midi-ns: Only for STM32H7, (Master Inter-Data Idleness) minimum time
+ delay in nanoseconds inserted between two consecutive data
+ frames.


Example:
--
2.7.4
\
 
 \ /
  Last update: 2018-12-09 14:55    [W:0.164 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site