lkml.org 
[lkml]   [2018]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/1] usb: dwc2: disable power_down on Amlogic devices
Date
Disable power_down by setting the parameter to
DWC2_POWER_DOWN_PARAM_NONE. This fixes a problem on various Amlogic
Meson SoCs where USB devices are only recognized when plugged in before
booting Linux. A hot-plugged USB device was not detected even though the
device got power (my USB thumb drive for example has an LED which lit
up).

A similar fix was implemented for Rockchip SoCs in commit c216765d3a1def
("usb: dwc2: disable power_down on rockchip devices"). That commit
suggests that a change in the dwc2 driver is the cause because the
default value for the "hibernate" parameter (which then got renamed to
"power_down" to support other modes) was changed in the v4.17 merge
window with:
commit 6d23ee9caa6790 ("Merge tag 'usb-for-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-testing").

Cc: <stable@vger.kernel.org> # 4.19
Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
drivers/usb/dwc2/params.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
index 7c1b6938f212..38c813b1d203 100644
--- a/drivers/usb/dwc2/params.c
+++ b/drivers/usb/dwc2/params.c
@@ -111,6 +111,7 @@ static void dwc2_set_amlogic_params(struct dwc2_hsotg *hsotg)
p->phy_type = DWC2_PHY_TYPE_PARAM_UTMI;
p->ahbcfg = GAHBCFG_HBSTLEN_INCR8 <<
GAHBCFG_HBSTLEN_SHIFT;
+ p->power_down = DWC2_POWER_DOWN_PARAM_NONE;
}

static void dwc2_set_amcc_params(struct dwc2_hsotg *hsotg)
--
2.19.2
\
 
 \ /
  Last update: 2018-12-09 20:02    [W:0.037 / U:0.472 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site