lkml.org 
[lkml]   [2018]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V2 1/2] mmc: mmci: send stop command if sbc error issue
From
Date


On 12/5/18 3:23 PM, Ulf Hansson wrote:
> On Tue, 20 Nov 2018 at 10:42, Ulf Hansson <ulf.hansson@linaro.org> wrote:
>>
>> On 7 November 2018 at 10:30, Ludovic Barre <ludovic.Barre@st.com> wrote:
>>> From: Ludovic Barre <ludovic.barre@st.com>
>>>
>>> Refer to "4.15 set block count command" of sd specification:
>>> Host needs to issue CMD12 if any error is detected in
>>> the CMD18 and CMD25 operations.
>>>
>>> In sbc case, the data->stop is fill by framework.
>>>
>>> Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
>>> ---
>>> drivers/mmc/host/mmci.c | 5 ++---
>>> 1 file changed, 2 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
>>> index 82bab35..13fa640 100644
>>> --- a/drivers/mmc/host/mmci.c
>>> +++ b/drivers/mmc/host/mmci.c
>>> @@ -1190,11 +1190,10 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
>>> /* The error clause is handled above, success! */
>>> data->bytes_xfered = data->blksz * data->blocks;
>>>
>>> - if (!data->stop || host->mrq->sbc) {
>>> + if (!data->stop || (host->mrq->sbc && !data->error))
>>> mmci_request_end(host, data->mrq);
>>> - } else {
>>> + else
>>> mmci_start_command(host, data->stop, 0);
>>
>> This looks correct to me!
>>
>> Although, just wanted to double check that you tested this for a case
>> where we have host->mrq->sbc set and got an error in data->error? I
>> guess it can be tricky, so I was thinking of manually trying to
>> instruct the code, to set an error in data->error, at some point to
>> trigger this code. That would at least give us some confidence that it
>> works as expected.
>
> I did some manual tests to trigger the error path. As far as I can
> tell, it works as expected and I observes that the core is able to
> recover and re-send the request.

Ulf, very thanks for the tests, and sorry for my busy status.
I will send as soon as possible the 2/2 with your recommendation (I will
more spare time for upstream)

>
> [...]
>
> So, I have added my tested-by tag and applied this for next. Thanks!
>
> In regards to patch2/2 I am awaiting your update.
>
> Kind regards
> Uffe
>

\
 
 \ /
  Last update: 2018-12-05 17:01    [W:0.060 / U:0.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site