lkml.org 
[lkml]   [2018]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 5/9] dt-bindings: input: touchscreen: goodix: Document vcc-supply property
On Thu, Dec 6, 2018 at 3:56 AM Jagan Teki <jagan@amarulasolutions.com> wrote:
>
> On Mon, Dec 3, 2018 at 4:11 PM Chen-Yu Tsai <wens@csie.org> wrote:
> >
> > On Mon, Dec 3, 2018 at 6:16 PM Jagan Teki <jagan@amarulasolutions.com> wrote:
> > >
> > > vcc-supply property is need for some Goodix CTP controller like GT5663
> > > where 3.3V external pull-up regulator connected via controller VCC pin.
> >
> > "External pull-up regulator" sounds fishy. Chips have power supply
> > pins, either combined, or separate rails for analog, digital, and I/O.
> > For Goodix chips these are AVDD28, AVDD22, DVDD12, amd VDDIO. The name
> > and description you provide match none of these.
>
> We have vcc pin in the connector to supply vcc-ctp, but indeed it is
> AVDD28 supply as per the reference schematic design[1] Page 23. Host
> interface has AVDD pin which is connected to ADVDD28 on goodix chip,
> so I can name this as avdd28-supply. is that OK?

Yeah. That's better. It's always best to be precise with hardware
descriptions. If you simplify it, the reason should be given in
detail. And it should be a good one.

ChenYu

\
 
 \ /
  Last update: 2018-12-06 04:02    [W:0.041 / U:2.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site