lkml.org 
[lkml]   [2018]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH net] net: mvpp2: 10G modes aren't supported on all ports
Hi Russell, Baruch,

On Tue, Dec 11, 2018 at 06:51:56PM +0000, Russell King - ARM Linux wrote:
> On Tue, Dec 11, 2018 at 07:53:42PM +0200, Baruch Siach wrote:
> > That is, something like this, right?
> >
> > diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> > index 125ea99418df..04cb0241ca2b 100644
> > --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> > +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> > @@ -4404,13 +4404,18 @@ static void mvpp2_phylink_validate(struct net_device *dev,
> > switch (state->interface) {
> > case PHY_INTERFACE_MODE_10GKR:
> > case PHY_INTERFACE_MODE_XAUI:
> > + if (port->gop_id != 0)
> > + goto empty_set;
> > + /* Fall-through */
> > case PHY_INTERFACE_MODE_NA:
> > - phylink_set(mask, 10000baseCR_Full);
> > - phylink_set(mask, 10000baseSR_Full);
> > - phylink_set(mask, 10000baseLR_Full);
> > - phylink_set(mask, 10000baseLRM_Full);
> > - phylink_set(mask, 10000baseER_Full);
> > - phylink_set(mask, 10000baseKR_Full);
> > + if (port->gop_id == 0) {
> > + phylink_set(mask, 10000baseCR_Full);
> > + phylink_set(mask, 10000baseSR_Full);
> > + phylink_set(mask, 10000baseLR_Full);
> > + phylink_set(mask, 10000baseLRM_Full);
> > + phylink_set(mask, 10000baseER_Full);
> > + phylink_set(mask, 10000baseKR_Full);
> > + }
> > /* Fall-through */
> > case PHY_INTERFACE_MODE_RGMII:
> > case PHY_INTERFACE_MODE_RGMII_ID:
> >
>
> Yep, looks fine to me, thanks.

This looks good, thanks! I'll send a v2.

Antoine

--
Antoine Ténart, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2018-12-12 10:31    [W:0.033 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site