lkml.org 
[lkml]   [2018]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH] spi: lpspi: Fix CLK pin becomes low before one transfer
Date
Hi Mark,

These five patches are based on patch series spi: lpspi: Add Slave Mode support for LPSPI. For the patch series make a big change, should I hold these five patches until the patch series are applied in your git branch?

Thanks for your patience.

Regards,
Clark Wang

> -----Original Message-----
> From: Mark Brown <broonie@kernel.org>
> Sent: Tuesday, December 11, 2018 22:30
> To: Clark Wang <xiaoning.wang@nxp.com>
> Cc: linux-spi@vger.kernel.org; linux-kernel@vger.kernel.org
> Subject: Re: [PATCH] spi: lpspi: Fix CLK pin becomes low before one transfer
>
> On Tue, Dec 04, 2018 at 06:23:19AM +0000, Clark Wang wrote:
> > Remove Reset operation in fsl_lpspi_config(). This RST may cause both
> > CLK and CS pins go from high to low level under cs-gpio mode.
> > Add fsl_lpspi_reset() function after one message transfer to clear all
> > flags in use.
>
> This doesn't apply against current code, please check and resend.

\
 
 \ /
  Last update: 2018-12-12 03:11    [W:0.434 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site