lkml.org 
[lkml]   [2018]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RESEND PATCH 1/2] clk: tegra: Fix maximum audio sync clock for Tegra124/210
From
Date
Quoting Jon Hunter (2018-12-03 02:28:40)
> The maximum frequency supported for I2S on Tegra124 and Tegra210 is
> 24.576MHz (as stated in the Tegra TK1 data sheet for Tegra124 and the
> Jetson TX1 module data sheet for Tegra210). However, the maximum I2S
> frequency is limited to 24MHz because that is the maximum frequency of
> the audio sync clock. Increase the maximum audio sync clock frequency
> to 24.576MHz for Tegra124 and Tegra210 in order to support 24.576MHz
> for I2S.
>
> Update the tegra_clk_register_sync_source() function so that it does
> not set the initial rate for the sync clocks and use the clock init
> tables to set the initial rate instead.
>
> Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
> Acked-by: Thierry Reding <treding@nvidia.com>
> ---

Applied to clk-next

\
 
 \ /
  Last update: 2018-12-10 20:11    [W:0.038 / U:1.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site