lkml.org 
[lkml]   [2018]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v4 12/15] dt-bindings: serial: Document RDA Micro UART
    Date
    From: Andreas Färber <afaerber@suse.de>

    Add an initial binding for the UART in RDA Micro RDA8810PL SoC.

    Signed-off-by: Andreas Färber <afaerber@suse.de>
    Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
    ---
    .../bindings/serial/rda,8810pl-uart.txt | 17 +++++++++++++++++
    1 file changed, 17 insertions(+)
    create mode 100644 Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt

    diff --git a/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt b/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt
    new file mode 100644
    index 000000000000..a08df97a69e6
    --- /dev/null
    +++ b/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt
    @@ -0,0 +1,17 @@
    +RDA Micro UART
    +
    +Required properties:
    +- compatible : "rda,8810pl-uart" for RDA8810PL SoCs.
    +- reg : Offset and length of the register set for the device.
    +- interrupts : Should contain UART interrupt.
    +- clocks : Phandle to the input clock.
    +
    +
    +Example:
    +
    + uart2: serial@20a90000 {
    + compatible = "rda,8810pl-uart";
    + reg = <0x20a90000 0x1000>;
    + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
    + clocks = <&uart_clk>;
    + };
    --
    2.17.1
    \
     
     \ /
      Last update: 2018-12-10 18:38    [W:4.064 / U:0.624 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site