Messages in this thread | | | From | Vincent Guittot <> | Date | Mon, 10 Dec 2018 17:33:22 +0100 | Subject | Re: [PATCH v4 00/10] steal tasks to improve CPU utilization |
| |
On Mon, 10 Dec 2018 at 17:29, Steven Sistare <steven.sistare@oracle.com> wrote: > > On 12/10/2018 11:10 AM, Vincent Guittot wrote: > > Hi Steven, > > > > On Thu, 6 Dec 2018 at 22:38, Steve Sistare <steven.sistare@oracle.com> wrote: > >> > >> When a CPU has no more CFS tasks to run, and idle_balance() fails to > >> find a task, then attempt to steal a task from an overloaded CPU in the > >> same LLC. Maintain and use a bitmap of overloaded CPUs to efficiently > >> identify candidates. To minimize search time, steal the first migratable > >> task that is found when the bitmap is traversed. For fairness, search > >> for migratable tasks on an overloaded CPU in order of next to run. > >> > >> This simple stealing yields a higher CPU utilization than idle_balance() > >> alone, because the search is cheap, so it may be called every time the CPU > >> is about to go idle. idle_balance() does more work because it searches > >> widely for the busiest queue, so to limit its CPU consumption, it declines > >> to search if the system is too busy. Simple stealing does not offload the > >> globally busiest queue, but it is much better than running nothing at all. > >> > >> The bitmap of overloaded CPUs is a new type of sparse bitmap, designed to > >> reduce cache contention vs the usual bitmap when many threads concurrently > >> set, clear, and visit elements. > >> > >> Patch 1 defines the sparsemask type and its operations. > >> > >> Patches 2, 3, and 4 implement the bitmap of overloaded CPUs. > >> > >> Patches 5 and 6 refactor existing code for a cleaner merge of later > >> patches. > >> > >> Patches 7 and 8 implement task stealing using the overloaded CPUs bitmap. > >> > >> Patch 9 disables stealing on systems with more than 2 NUMA nodes for the > >> time being because of performance regressions that are not due to stealing > >> per-se. See the patch description for details. > >> > >> Patch 10 adds schedstats for comparing the new behavior to the old, and > >> provided as a convenience for developers only, not for integration. > >> > >> The patch series is based on kernel 4.20.0-rc1. It compiles, boots, and > >> runs with/without each of CONFIG_SCHED_SMT, CONFIG_SMP, CONFIG_SCHED_DEBUG, > >> and CONFIG_PREEMPT. It runs without error with CONFIG_DEBUG_PREEMPT + > >> CONFIG_SLUB_DEBUG + CONFIG_DEBUG_PAGEALLOC + CONFIG_DEBUG_MUTEXES + > >> CONFIG_DEBUG_SPINLOCK + CONFIG_DEBUG_ATOMIC_SLEEP. CPU hot plug and CPU > >> bandwidth control were tested. > >> > >> Stealing improves utilization with only a modest CPU overhead in scheduler > >> code. In the following experiment, hackbench is run with varying numbers > >> of groups (40 tasks per group), and the delta in /proc/schedstat is shown > >> for each run, averaged per CPU, augmented with these non-standard stats: > >> > >> %find - percent of time spent in old and new functions that search for > >> idle CPUs and tasks to steal and set the overloaded CPUs bitmap. > >> > >> steal - number of times a task is stolen from another CPU. > >> > >> X6-2: 1 socket * 10 cores * 2 hyperthreads = 20 CPUs > >> Intel(R) Xeon(R) CPU E5-2630 v4 @ 2.20GHz > >> hackbench <grps> process 100000 > >> sched_wakeup_granularity_ns=15000000 > >> > >> baseline > >> grps time %busy slice sched idle wake %find steal > >> 1 8.084 75.02 0.10 105476 46291 59183 0.31 0 > >> 2 13.892 85.33 0.10 190225 70958 119264 0.45 0 > >> 3 19.668 89.04 0.10 263896 87047 176850 0.49 0 > >> 4 25.279 91.28 0.10 322171 94691 227474 0.51 0 > >> 8 47.832 94.86 0.09 630636 144141 486322 0.56 0 > >> > >> new > >> grps time %busy slice sched idle wake %find steal %speedup > >> 1 5.938 96.80 0.24 31255 7190 24061 0.63 7433 36.1 > >> 2 11.491 99.23 0.16 74097 4578 69512 0.84 19463 20.9 > >> 3 16.987 99.66 0.15 115824 1985 113826 0.77 24707 15.8 > >> 4 22.504 99.80 0.14 167188 2385 164786 0.75 29353 12.3 > >> 8 44.441 99.86 0.11 389153 1616 387401 0.67 38190 7.6 > >> > >> Elapsed time improves by 8 to 36%, and CPU busy utilization is up > >> by 5 to 22% hitting 99% for 2 or more groups (80 or more tasks). > >> The cost is at most 0.4% more find time. > > > > I have run some hackbench tests on my hikey arm64 octo cores with your > > patchset. My original intent was to send a tested-by but I have some > > performances regressions. > > This hikey is the smp one and not the asymetric hikey960 that Valentin > > used for his tests > > The sched domain topology is > > domain-0: span=0-3 level=MC and domain-0: span=4-7 level=MC > > domain-1: span=0-7 level=DIE > > > > I have run 12 times hackbench -g $j -P -l 2000 with j equals to 1 2 3 4 8 > > > > grps time > > 1 1.396 > > 2 2.699 > > 3 3.617 > > 4 4.498 > > 8 7.721 > > > > Then after disabling STEAL in sched_feature with echo NO_STEAL > > > /sys/kernel/debug/sched_features , the results become: > > grps time > > 1 1.217 > > 2 1.973 > > 3 2.855 > > 4 3.932 > > 8 7.674 > > > > I haven't looked in details about some possible reasons of such > > difference yet and haven't collected the stats that you added with > > patch 10. > > Have you got a script to collect and post process them ? > > > > Regards, > > Vincent > > Thanks Vincent. What is the value of /proc/sys/kernel/sched_wakeup_granularity_ns?
it's 4000000
> Try 15000000. Your 8-core system is heavily overloaded with 40 * groups tasks, > and I suspect preemptions are killing performance.
ok. I'm going to run the tests with the proposed value
> > I have a python script to post-process schedstat files, but it does many things > and is large and I am not ready to share it. I can write a short bash script if > that would help.
It was mainly in case you wanted the figures of these statistics
Vincent
> > - Steve
| |