Messages in this thread | | | Date | Mon, 10 Dec 2018 19:17:38 +0530 | From | Manivannan Sadhasivam <> | Subject | Re: [PATCH v2 3/4] arm64: dts: actions: s700: Add I2C controller nodes |
| |
On Mon, Nov 26, 2018 at 07:58:20PM +0100, Parthiban Nallathambi wrote: > Add I2C controller nodes for Actions Semiconductor S700 SoC. > > Signed-off-by: Parthiban Nallathambi <pn@denx.de>
Ideally, dts patches should come before driver.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cheers, Mani
> --- > arch/arm64/boot/dts/actions/s700.dtsi | 40 +++++++++++++++++++++++++++ > 1 file changed, 40 insertions(+) > > diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi > index 192c7b39c8c1..35fddba2af1c 100644 > --- a/arch/arm64/boot/dts/actions/s700.dtsi > +++ b/arch/arm64/boot/dts/actions/s700.dtsi > @@ -174,6 +174,46 @@ > #clock-cells = <1>; > }; > > + i2c0: i2c@e0170000 { > + compatible = "actions,s700-i2c"; > + reg = <0 0xe0170000 0 0x1000>; > + clocks = <&cmu CLK_I2C0>; > + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c1: i2c@e0174000 { > + compatible = "actions,s700-i2c"; > + reg = <0 0xe0174000 0 0x1000>; > + clocks = <&cmu CLK_I2C1>; > + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c2: i2c@e0178000 { > + compatible = "actions,s700-i2c"; > + reg = <0 0xe0178000 0 0x1000>; > + clocks = <&cmu CLK_I2C2>; > + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c3: i2c@e017c000 { > + compatible = "actions,s700-i2c"; > + reg = <0 0xe017c000 0 0x1000>; > + clocks = <&cmu CLK_I2C3>; > + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > sps: power-controller@e01b0100 { > compatible = "actions,s700-sps"; > reg = <0x0 0xe01b0100 0x0 0x100>; > -- > 2.17.2 >
| |