lkml.org 
[lkml]   [2018]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2] net: stmmac: Move debugfs init/exit to ->probe()/->remove()
From
From: Thierry Reding <thierry.reding@gmail.com>
Date: Tue, 27 Nov 2018 14:21:43 +0100

> From: Thierry Reding <treding@nvidia.com>
>
> Setting up and tearing down debugfs is current unbalanced, as seen by
> this error during resume from suspend:
>
> [ 752.134067] dwc-eth-dwmac 2490000.ethernet eth0: ERROR failed to create debugfs directory
> [ 752.134347] dwc-eth-dwmac 2490000.ethernet eth0: stmmac_hw_setup: failed debugFS registration
>
> The imbalance happens because the driver creates the debugfs hierarchy
> when the device is opened and tears it down when the device is closed.
> There's little gain in that, and it could be argued that it is even
> surprising because it's not usually done for other devices. Fix the
> imbalance by moving the debugfs creation and teardown to the driver's
> ->probe() and ->remove() implementations instead.
>
> Note that the ring descriptors cannot be read while the interface is
> down, so make sure to return an empty file when the descriptors_status
> debugfs file is read.
>
> Signed-off-by: Thierry Reding <treding@nvidia.com>
> ---
> This applies on top of net-next.
>
> Changes in v2:
> - avoid access to ring descriptors when interface is down

Applied, thanks.

\
 
 \ /
  Last update: 2018-11-30 22:17    [W:0.135 / U:0.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site